IDES Prospector Already have an account? Login Here

IDES

Geon™ HTX Ultra LA426 Tan 3725

Polyvinyl Chloride Alloy

Supplied by PolyOne Corporation

The technical datasheet with complete property values for Geon™ HTX Ultra LA426 Tan 3725 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Optimum for Black and Darker Colors between 50 and 70 L value. Also suitable for colors above 70 L value.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Features 
  • High Impact Resistance
  • High Stiffness
  
Uses 
  • Outdoor Applications
  • Profiles
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
PVC Cell Classification
 
 ASTM D4216
PVC Cell Classification
 
 ASTM D1784
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
 ASTM D638
Tensile Strength 2 (Yield)
psi
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in, Compression Molded)
ft·lb/in
 ASTM D256A
Drop Impact Resistance
     ASTM D4226
73°F 3
in·lb/mil
  
73°F 4
in·lb/mil
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D, 15 sec)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.125 in
°F
  
66 psi, Annealed, 0.125 in
°F
  
264 psi, Unannealed, 0.125 in
°F
  
264 psi, Annealed, 0.125 in
°F
  
CLTE - Flow
in/in/°F
 ASTM D696
Additional Information
Nominal Value
Unit
Test Method
Ease of Sizing
 
  
Recommend drying material for a minimum of 2 hours at 160 degrees Farenheit.
Physical properties of Geon HTX Ultra LA426 Tan 3725
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Geon™ HTX Ultra LA426 Tan 3725, Geon HTX Ultra LA426 Tan 3725, Geon™ HTX Ultra , Geon HTX Ultra, GeonHTXUltraLA426Tan3725, GeonHTXUltra, UltraLA 426 Tan 3725, UltraLA426 Tan 3725, UltraLA426, Ultra, LA 426 Tan 3725, UltraLA426Tan3725, LA426 Tan 3725, LA426, 426Tan, Tan3725, LA426Tan3725, Polyvinyl Chloride Alloy, PVC Alloy, Polyvinyl Chloride, PVC, PolyOne, PolyvinylChlorideAlloy, PVCAlloy, PolyvinylChloride, 426LA, 426UltraLA
Features
Features may also be described by the following terms: High Impact Resistance, High Stiffness.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 0.20 in/min
3Procedure A, C.125 Dart
4Procedure B, C.125 Dart
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.