IDES Prospector Already have an account? Login Here

IDES

Ren:c:o-thane RP 6422-1

Polyurethane Thermoset Elastomer

Supplied by Huntsman Advanced Materials

The technical datasheet with complete property values for Ren:c:o-thane RP 6422-1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Abrasion Resistance
  • Good Impact Resistance
  • Low Viscosity
Appearance 
  • Amber
Forms 
  • Liquid
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Elastomers
Nominal Value
Unit
Test Method
Tear Strength
lbf/in
 ASTM D624
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Hardener
 
  
Resin
 
  
Pot Life (77°F)
min
  
Thermoset Mix Viscosity
cP
 ASTM D2393
Demold Time (77°F)
min
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ren:c:o-thane RP 6422-1, Rencothane RP 64221, Ren:c:o-thane , Rencothane, Ren/c/o-thane, Ren+c+o-thane, Ren-c-o-thane, Ren_c_o-thane, Ren c o-thane, Ren:c:o:thane, Ren:c:o/thane, Ren:c:o+thane, Ren:c:o_thane, Ren:c:o thane, RencothaneRP64221, Ren_c_othane, Ren c othane, Renco_thane, Renco thane, RP 6422, RP 6422-1, RP 64221, RP 6422:1, RP 6422/1, RP 6422+1, RP 6422_1, RP 6422 1, RP6422, 64221, RP64221, RP6422_1, Polyurethane Thermoset Elastomer, TSU, Huntsman Adv Matl, PolyurethaneThermosetElastomer, 6422RP
Features
Features may also be described by the following terms: Good Abrasion Resistance, Abrasion Resistant, Good Impact Resistance, Low Viscosity.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.