IDES Prospector Already have an account? Login Here

IDES

Elvaloy® 12024 EACS

Styrene Methyl Methacrylate Acrylic Copolymer

Supplied by DuPont Packaging & Industrial Polymers

The technical datasheet with complete property values for Elvaloy® 12024 EACS is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Elvaloy® 12024 EAC S is a copolymer of ethylene and methyl acrylate containing 24% methyl acrylate. Elvaloy® 12024 EAC S contains an antioxidant additive.

Elvaloy® 12024 EAC S is intended for extrusion, coextrusion, compounding and injection molding. DuPont technical specialists are available by phone or email to further discuss application requirements and polymer selection.

Elvaloy® 12024 EAC S is easily processed on standard equipment used for low-density polyethylene.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
 
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Copolymer
 
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Coextrusion
  • Compounding
  • Extrusion
  • Injection Molding
 
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
--
 
ASTM D792
--
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238, ISO 1133
Methyl Acrylate Content
wt%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     
-- 2
psi
ASTM D638
--
psi
ISO 527-2/1
Tensile Strength
     
Yield 3
psi
ASTM D638
Yield
psi
ISO 527-2/500
Tensile Elongation
     
Break 3
%
ASTM D638
Break
%
ISO 527-2/500
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
    ASTM D2240, ISO 868
Shore A
 
 
Shore D
 
 
Thermal
Nominal Value
Unit
Test Method
Peak Melting Temperature
°F
ASTM D3418, ISO 3146
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Elvaloy® 12024 EACS, Elvaloy 12024 EACS, Elvaloy® , Elvaloy, Elvaloy12024EACS, 12024 EACS, 12024EACS, Acrylic, Acrylic, Styrene Methyl Methacrylate Copolymer, Acrylic Styrene Methyl Methacrylate Copolymer, Acrylic (SMMA), Acrylic SMMA, DuPont P&IP, AcrylicStyreneMethylMethacrylateCopolymer, AcrylicSMMA, EACS12024
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
20.039 in/min
320 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.