|
Density
|
|
g/cm³
|
ISO 1183 |
|
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
|
|
g/10 min
|
ISO 1133 |
|
Tensile Modulus (0.157 in, Injection Molded)
|
|
psi
|
ISO 527-2/50 |
|
Tensile Stress
|
|
|
ISO 527-2/50 |
|
Yield, 0.157 in, Injection Molded
|
|
psi
|
|
|
Break, 0.157 in, Injection Molded
|
|
psi
|
|
|
Tensile Strain
|
|
|
ISO 527-2/50 |
|
Yield, 0.157 in, Injection Molded
|
|
%
|
|
|
Break, 0.157 in, Injection Molded
|
|
%
|
|
|
Flexural Modulus 2 (Injection Molded)
|
|
psi
|
ISO 178 |
|
Flexural Strength 2 (Injection Molded)
|
|
psi
|
ISO 178 |
|
Charpy Notched Impact Strength
|
|
|
ISO 179/1A |
|
-40°F, Injection Molded
|
|
ft·lb/in²
|
|
|
-4°F, Injection Molded
|
|
ft·lb/in²
|
|
|
32°F, Injection Molded
|
|
ft·lb/in²
|
|
|
73°F, Injection Molded
|
|
ft·lb/in²
|
|
|
Notched Izod Impact Strength
|
|
|
ISO 180/1A |
|
-40°F, Injection Molded
|
|
ft·lb/in²
|
|
|
-4°F, Injection Molded
|
|
ft·lb/in²
|
|
|
32°F, Injection Molded
|
|
ft·lb/in²
|
|
|
73°F, Injection Molded
|
|
ft·lb/in²
|
|
|
Shore Hardness (Shore D)
|
|
|
ISO 868 |
|
Heat Deflection Temperature
|
|
|
|
|
66 psi, Unannealed
|
|
°F
|
ISO 75-2/B |
|
264 psi, Unannealed
|
|
°F
|
ISO 75-2/A |
|
Vicat Softening Temperature
|
|
°F
|
ISO 306/A |
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Biopearls™ M106, Biopearls M106, Biopearls™ , Biopearls, BiopearlsM106, M 106, M106, Polylactic Acid, PLA, PolylacticAcid, 106M
|
|
Features may also be described by the following terms: Good Color Stability, Renewable Resources, From Renewable Resources, Renewable Resource Derived, Renewable Raw Materials, Renewable Resource Content.
|
|
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EN (1), ASTM (1).
|