Processing
- Halar 6614 is intended as a primer material to apply directly to substrates. It can be processed using either conventional electrostatic powder coating or fluidized bed equipment.
- In the case of electrostatic coating the procedure involves substrate preparation, spray coating, baking and cooling. Several passes maybe required to obtain the desired Halar load and ensure pin-hole free coatings. Alternatively using fluidized bed equipment preheated items can be coated by dipping directly into the fluidized powder followed by baking. The dipping and baking operation can be repeated to achieve multiple coats and build up the desired coating thickness.
- Halar 6614 can be used neat and without any further formulation. For both techniques, substrate preparation, preheating, coating and baking parameters must all be well controlled to achieve defect free coated items and optimum adhesion.
Storage and Handling
- Halar melt processable fluropolymer resins can be stored without shelf life issues when kept in a clean and dry area at ambient temperatures. Opened containers should be tightly resealed to prevent dust contamination.
Safety and Toxicology
- Before using Halar melt processable fluropolymer resins consult the product Material Safety Data Sheet and follow all label directions an handling precautions.
- As with all fluoropolymer materials, handling and processing should only be carried out in well ventilated areas. Vapour extractor units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact wash with soap and water. In case of eye contact flush with water immediately and seek medical help. Do not smoke in areas contaminated with powder, vapour or fumes.
- See Material Safety Data Sheet for detailed advice on waste disposal methods.
Packaging
- Halar 6614 is packaged in 25kg non returnable drums. Each drum has two bags liner made of polyethylene resin.
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Halar® 6614, Halar 6614, Halar® , Halar, Halar6614, 6614, Polyethylene, Chlorotrifluoroethylene, Polyethylene Chlorotrifluoroethylene, ECTFE, Polyethylene, PE, Solvay Specialty, PolyethyleneChlorotrifluoroethylene
|
|
Features may also be described by the following terms: Good Thermal Stability, Semi-Crystalline, Bondability, Bondable, Good Chemical Resistance, Chemical Resistant, Good Adhesion, Good Corrosion Resistance, Corrosion Resistant.
|