Processing
- Halar 9414 can be processed using normal electrostatic powder coating techniques. Generally the procedure involves substrate preparation, spray coating, baking and cooling. Depending on the application further processing can be carried out. Several passes maybe required to obtain the desired Halar load and build up coating thickness.
- Halar 9414 can be used neat and without any further formulation. Substrate preparation, gun parameters such as voltage and both oven temperature and time must all be well controlled to achieve defect free coated items.
Storage and Handling
- Halar melt processable fluropolymer resins can be stored without shelf life issues when kept in a clean and dry area at ambient temperatures. Opened containers should be tightly resealed to prevent dust contamination.
Safety and Toxicology
- Before using Halar melt processable fluropolymer resins consult the product Material Safety Data Sheet and follow all label directions an handling precautions.
- As with all fluoropolymer materials, handling and processing should only be carried out in well ventilated areas. Vapour extractor units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact wash with soap and water. In case of eye contact flush with water immediately and seek medical help. Do not smoke in areas contaminated with powder, vapour or fumes.
- See Material Safety Data Sheet for detailed advice on waste disposal methods.
Packaging
- Halar 9414 is packaged in 25kg non returnable drums. Each drum has two bags liner made of polyethylene resin.
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Halar® 9414, Halar 9414, Halar® , Halar, Halar9414, 9414, Polyethylene, Chlorotrifluoroethylene, Polyethylene Chlorotrifluoroethylene, ECTFE, Polyethylene, PE, Solvay Specialty, PolyethyleneChlorotrifluoroethylene
|
|
Features may also be described by the following terms: Good Thermal Stability, Semi-Crystalline, Good Surface Finish, Good Chemical Resistance, Chemical Resistant, Good Electrical Properties, Good Corrosion Resistance, Corrosion Resistant, High Hardness, Hard.
|