IDES Prospector Already have an account? Login Here

IDES

EMERGE™ PC 8330

Advanced Resin

Supplied by Styron LLC

The technical datasheet with complete property values for EMERGE™ PC 8330 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
EMERGE™ PC 8330 advanced resin is a transparent, ultraviolet light resistant and ignition resistant PC resin that contains no chlorinated or brominated nor phosphorous-based additives. It combines mechanical performance and high heat resistance with excellent processing characteristics. It is a transparent material with UL-94 V-0 rating at 2.5 mm.

Applications:
LCD TV Housings
Lighting
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)
g/10 min
 ISO 1133
Molding Shrinkage - Flow
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0.157 in, Injection Molded)
psi
 ISO 527-2/1
Tensile Stress
     ISO 527-2/50
Yield, 0.157 in, Injection Molded
psi
  
Break, 0.157 in, Injection Molded
psi
  
Tensile Strain
     ISO 527-2/50
Yield, 0.157 in, Injection Molded
%
  
Break, 0.157 in, Injection Molded
%
  
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1eA
Notched Izod Impact
      
0.126 in, Injection Molded 2
ft·lb/in
 ISO 180
73°F, Injection Molded
ft·lb/in²
 ISO 180/A
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A120
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL 3 (0.0984 in)
 
 UL 94
Glow Wire Flammability Index 3
     IEC 60695-2-12
0.0394 in
°F
  
0.0787 in
°F
  
0.118 in
°F
  
Glow Wire Ignition Temperature 3
     IEC 60695-2-13
0.0394 in
°F
  
0.0787 in
°F
  
0.118 in
°F
  
Optical
Nominal Value
Unit
Test Method
Transmittance
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: EMERGE™ PC 8330, EMERGE PC 8330, EMERGE™ , EMERGE, EMERGEPC8330, PC 8330, PC8330, Polycarbonate, PC, Styron, 8330PC
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Method 4A
3This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.