IDES Prospector Already have an account? Login Here

IDES

Tecnoflon® FOR 210

Fluoroelastomer

Supplied by Solvay Specialty Polymers

The technical datasheet with complete property values for Tecnoflon® FOR 210 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TECNOFLON® FOR 210 is a very low viscosity cure incorporated fluoroelastomer copolymer. Tecnoflon® FOR 210 is mainly intended for blending with other polymers of the Tecnoflon® family to achieve the desired viscosity. Tecnoflon® FOR 210 was developed with a new curing system that improves the physical properties of the finished product. Processing characteristics such as flow and scorch safety are also enhanced. Tecnoflon® FOR 210 is well suited for applications were superior flow, mold release and excellent compression set are required.

Some of the basic properties of Tecnoflon® FOR 210 are:
  • Excellent scorch safety
  • Superior mold flow
  • Very good mold release
  • Lack of mold fouling
  • Low compression set
  • Good extrusion behaviour

Tecnoflon® FOR 210 can be used for injection and transfer moulding of O-rings, gaskets, and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers.
The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Copolymer
  • Good Flow
  • Good Mold Release
  • Low Compression Set
  • Low Viscosity
Uses 
  • Belts/Belt Repair
  • Blending
  • Gaskets
  • Hose
  • Profiles
  • Seals
  • Sheet
Appearance 
  • Off-White
Forms 
  • Slab
Processing Method 
  • Calendering
  • Compounding
  • Extrusion
  • Injection Molding
  • Resin Transfer Molding
Physical
Nominal Value
Unit
 
Mooney Viscosity 2 (ML 1+10, 250°F)
MU
  
Fluorine Content 2
%
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Tecnoflon® FOR 210, Tecnoflon FOR 210, Tecnoflon® , Tecnoflon, TecnoflonFOR210, FOR 210, FOR210, Fluoroelastomer, Fluorelastomer, Fluoropolymer, Solvay Specialty, 210FOR
Features
Features may also be described by the following terms: Good Mold Release, Easy Release, Good Demolding, Low Compression Set, Low Viscosity, Good Flow.
Uses
Uses may also be described by the following terms: Gaskets, Gasketing, Belts/Belt Repair, Belt Repair.
Notes
1Typical properties: these are not to be construed as specifications.
2Raw polymer
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.