IDES Prospector Already have an account? Login Here

IDES

Tecnoflon® FOR 532

Fluoroelastomer

Supplied by Solvay Specialty Polymers

The technical datasheet with complete property values for Tecnoflon® FOR 532 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TECNOFLON® FOR 532 is a medium viscosity cure incorporated fluoroelastomer copolymer. This grade is well suited for applications where excellent compression set and superior mold release, are required. It can be compounded to meet MIL-R83428B and other major fluoroelastomer specifications.

Some of the basic properties of Tecnoflon® FOR 532 are:
  • Very fast cure rate
  • Excellent scorch safety
  • Good mold flow
  • Superior mold release
  • Lack of mold fouling
  • Very low compression set

TECNOFLON® FOR 532 can be used for compression and transfer moulding of O-rings, gaskets, and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers.
The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Copolymer
  • Fast Cure
  • Good Flow
  • Good Mold Release
  • Low Compression Set
  • Medium Viscosity
Uses 
  • Belts/Belt Repair
  • Blending
  • Gaskets
  • Hose
  • Profiles
  • Seals
  • Sheet
Appearance 
  • Off-White
Forms 
  • Slab
Processing Method 
  • Calendering
  • Compounding
  • Compression Molding
  • Extrusion
  • Resin Transfer Molding
Physical
Nominal Value
Unit
 
Mooney Viscosity 2 (ML 1+10, 250°F)
MU
  
Fluorine Content 2
%
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Tecnoflon® FOR 532, Tecnoflon FOR 532, Tecnoflon® , Tecnoflon, TecnoflonFOR532, FOR 532, FOR532, Fluoroelastomer, Fluorelastomer, Fluoropolymer, Solvay Specialty, 532FOR
Features
Features may also be described by the following terms: Good Mold Release, Easy Release, Good Demolding, Good Flow, Medium Viscosity, Low Compression Set, Fast Cure, Fast Curing.
Uses
Uses may also be described by the following terms: Gaskets, Gasketing, Belts/Belt Repair, Belt Repair.
Notes
1Typical properties: these are not to be construed as specifications.
2Raw polymer
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.