IDES Prospector Already have an account? Login Here

IDES

Tecnoflon® FOR 9385F

Fluoroelastomer

Supplied by Solvay Specialty Polymers

The technical datasheet with complete property values for Tecnoflon® FOR 9385F is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TECNOFLON® FOR 9385F is a medium viscosity cure incorporated fluoroelastomer terpolymer (FKM) with 68.5 % fluorine content. Tecnoflon® FOR 9385F is designed to improve bonding in any application requiring adhesion to metal. In shaft seals or valve stem seals production, Tecnoflon® FOR 9385F greatly reduces the reject rate due to adhesion and molding problems.

Some of the basic properties of Tecnoflon® FOR 9385F are:
  • Superior bonding to metal
  • Very good scorch safety
  • Outstanding processability
  • Lack of mold fouling
  • Excellent hot tear resistance
  • Excellent mold release

Tecnoflon® FOR 9385F can be used for compression, injection and transfer molding of shaft seals, valve stem seals, O-rings, gaskets and seals. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Tecnoflon® FOR 9385F can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Bondability
  • Good Adhesion
  • Good Mold Release
  • Good Processability
  • Good Tear Strength
  • Medium Viscosity
  • Terpolymer
Uses 
  • Belts/Belt Repair
  • Blending
  • Gaskets
  • Hose
  • Profiles
  • Seals
  • Sheet
  • Valves/Valve Parts
Appearance 
  • Off-White
Forms 
  • Slab
Processing Method 
  • Calendering
  • Compounding
  • Compression Molding
  • Extrusion
  • Injection Molding
  • Resin Transfer Molding
Physical
Nominal Value
Unit
 
Mooney Viscosity 2 (ML 1+10, 250°F)
MU
  
Fluorine Content 2
%
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Tecnoflon® FOR 9385F, Tecnoflon FOR 9385F, Tecnoflon® , Tecnoflon, TecnoflonFOR9385F, FOR 9385 F, FOR 9385F, FOR9385, 9385F, FOR9385F, Fluoroelastomer, Fluorelastomer, Fluoropolymer, Solvay Specialty, 9385FOR
Features
Features may also be described by the following terms: Bondability, Bondable, Good Processability, Easy Processing, Medium Viscosity, Good Adhesion, Good Mold Release, Easy Release, Good Demolding, Good Tear Strength.
Uses
Uses may also be described by the following terms: Gaskets, Gasketing, Belts/Belt Repair, Belt Repair, Valves, Valve Parts.
Notes
1Typical properties: these are not to be construed as specifications.
2Raw polymer
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.