IDES Prospector Already have an account? Login Here

IDES

Tecnoflon® N 215

Fluoroelastomer

Supplied by Solvay Specialty Polymers

The technical datasheet with complete property values for Tecnoflon® N 215 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TECNOFLON® N 215 is a very low viscosity fluoroelastomer copolymer. Tecnoflon® N 215 is intended for blending with other polymers of the Tecnoflon® family to achieve the desired viscosity. It is also intended for high concentration solution applications, such as dip coated items, fabric coatings and spray coating. Tecnoflon® N 215 can be mixed in the same way as all the other Tecnoflon® grades and can be used in any application requiring either very low compound viscosity or "low viscosity", highly loaded high hardness compounds. Tecnoflon® N 215 does not contain curatives: therefore the proper levels of Tecnoflon® FOR M1 and Tecnoflon® FOR M2 must be added to achieve the required properties. It can be also cured with diamine based systems such as Tecnoflon® Tecnocin A and Tecnoflon® Tecnocin B.

Some of the unique properties of TECNOFLON®N 215 are:
  • Solution applications
    • Excellent pot life
    • Very low Brookfield viscosity
    • Excellent adhesion to substrates
  • Dry applications
    • Superior mould flow
    • Low compound viscosity
    • Good compression set

Tecnoflon® N 215 can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers.

Compounds based on Tecnoflon® N 215 can be dispersed in solvents for coating applications. Finished goods can be produced by a variety of rubber processing methods.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
 
Features 
  • Copolymer
  • Good Adhesion
  • Good Flow
  • Low Compression Set
  • Low Viscosity
Uses 
  • Blending
  • Coating Applications
  • Compounding
  • Fabric Coatings
 
Appearance 
  • Translucent
Forms 
  • Slab
Processing Method 
  • Coating
  • Compounding
  • Dip Coating
  • Spraying
 
Physical
Nominal Value
Unit
 
Mooney Viscosity 2 (ML 1+10, 250°F)
MU
 
Fluorine Content 2
%
 
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Tecnoflon® N 215, Tecnoflon N 215, Tecnoflon® , Tecnoflon, TecnoflonN215, N 215, N215, Fluoroelastomer, Fluorelastomer, Fluoropolymer, Solvay Specialty, 215N
Features
Features may also be described by the following terms: Good Flow, Low Viscosity, Good Adhesion, Low Compression Set.
Uses
Uses may also be described by the following terms: Fabric Coatings, Fabric Coating, Compounding, Compounds.
Notes
1Typical properties: these are not to be construed as specifications.
2Raw polymer
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.