IDES Prospector Already have an account? Login Here

IDES

Tecnoflon® NH

Fluoroelastomer

Supplied by Solvay Specialty Polymers

The technical datasheet with complete property values for Tecnoflon® NH is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TECNOFLON® NH is a high viscosity fluoroelastomer copolymer. Tecnoflon® NH is intended as a general purpose fluoroelastomer. It can be blended with other polymers of the Tecnoflon® family to meet specific requirements. Tecnoflon® NH does not contain curatives: therefore the proper levels of Tecnoflon® FOR M1 and Tecnoflon® FOR M2 must be added to achieve the required properties. It can be also cured with diamine based systems such as Tecnoflon® Tecnocin A and Tecnoflon® Tecnocin B.

Some of the unique properties of TECNOFLON® NH are:
  • Excellent compression set
  • Lack of mould fouling
  • Excellent mould release

TECNOFLON® NH can be used for compression moulding of O-rings, seals, gaskets and other items. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers.
Finished goods can be produced by a variety of rubber processing methods.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Copolymer
  • General Purpose
  • Good Mold Release
  • High Viscosity
  • Low Compression Set
Uses 
  • Blending
  • Gaskets
  • General Purpose
  • Seals
  
Appearance 
  • Translucent
Forms 
  • Slab
Processing Method 
  • Compounding
  • Compression Molding
  
Physical
Nominal Value
Unit
 
Mooney Viscosity 2 (ML 1+10, 250°F)
MU
  
Fluorine Content 2
%
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Tecnoflon® NH, Tecnoflon NH, Tecnoflon® , Tecnoflon, TecnoflonNH, NH, Fluoroelastomer, Fluorelastomer, Fluoropolymer, Solvay Specialty
Features
Features may also be described by the following terms: High Viscosity, Good Mold Release, Easy Release, Good Demolding, Low Compression Set.
Uses
Uses may also be described by the following terms: Gaskets, Gasketing.
Notes
1Typical properties: these are not to be construed as specifications.
2Raw polymer
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.