IDES Prospector Already have an account? Login Here

IDES

Tecnoflon® P 757

Fluoroelastomer

Supplied by Solvay Specialty Polymers

The technical datasheet with complete property values for Tecnoflon® P 757 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TECNOFLON® P 757 is a medium viscosity, medium fluorine (67%), peroxide curable fluoroelastomer. Tecnoflon® P 757 exhibits superior resistance to a wide variety of chemicals, coupled with excellent processability, optimum compression set and good flexibility at low temperatures. Tecnoflon® P 757 can be cross-linked using organic peroxides in conjunction with a coagent.

Some of the basic properties of TECNOFLON® P 757 are:
  • Low post cure
  • Superior mold flow
  • Lack of mold fouling
  • Excellent mold release
  • Good chemical resistance
  • Good stress relaxation
  • Good metal bonding
  • Good low temperature performance

Tecnoflon® P 757 can be used for compression, injection and transfer molding of shaft seals, valve seals, O-rings, gaskets or any item requiring superior chemical resistance.
Tecnoflon® P 757 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Bondability
  • Crosslinkable
  • Good Chemical Resistance
  • Good Flow
  • Good Mold Release
  • Good Processability
  • Low Compression Set
  • Low Temperature Flexibility
  • Medium Viscosity
Uses 
  • Belts/Belt Repair
  • Blending
  • Gaskets
  • Hose
  • Low Temperature Applications
  • Metal Bonding
  • Profiles
  • Seals
  • Sheet
  • Valves/Valve Parts
Appearance 
  • Translucent
Forms 
  • Slab
Processing Method 
  • Calendering
  • Compounding
  • Compression Molding
  • Extrusion
  • Injection Molding
  • Resin Transfer Molding
Physical
Nominal Value
Unit
 
Mooney Viscosity 2 (ML 1+10, 250°F)
MU
  
Fluorine Content 2
%
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Tecnoflon® P 757, Tecnoflon P 757, Tecnoflon® , Tecnoflon, TecnoflonP757, P 757, P757, Fluoroelastomer, Fluorelastomer, Fluoropolymer, Solvay Specialty, 757P
Features
Features may also be described by the following terms: Good Flow, Medium Viscosity, Good Mold Release, Easy Release, Good Demolding, Low Compression Set, Good Chemical Resistance, Chemical Resistant, Good Processability, Easy Processing, Low Temperature Flexibility, Bondability, Bondable.
Uses
Uses may also be described by the following terms: Gaskets, Gasketing, Belts/Belt Repair, Belt Repair, Valves, Valve Parts, Metal Bonding.
Notes
1Typical properties: these are not to be construed as specifications.
2Raw polymer
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.