IDES Prospector Already have an account? Login Here

IDES

Tecnoflon® PL 855

Fluoroelastomer

Supplied by Solvay Specialty Polymers

The technical datasheet with complete property values for Tecnoflon® PL 855 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TECNOFLON® PL 855 is a new generation low temperature peroxide curable medium viscosity fluoroelastomer with 64% wt fluorine content. Tecnoflon® PL 855 exhibits excellent low temperature flexibility (TR10 = -30°C). Like all other Tecnoflon® peroxide curable grades, it exhibits excellent processability; moreover it needs very short post-curing cycles.

Some of the basic properties of Tecnoflon® PL 855 are:
  • Excellent low temperature flexibility
  • Low post cure
  • Superior mold flow
  • Lack of mold fouling
  • Excellent mold release

Tecnoflon® PL 855 can be used for injection, injection-compression and transfer molding of O-rings, gaskets and seals. Tecnoflon® PL 855 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers.
This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Fast Cure
  • Good Flow
  • Good Mold Release
  • Good Processability
  • Low Temperature Flexibility
  • Medium Viscosity
Uses 
  • Belts/Belt Repair
  • Blending
  • Gaskets
  • Hose
  • Low Temperature Applications
  • Profiles
  • Seals
  • Sheet
Appearance 
  • Translucent
Forms 
  • Slab
Processing Method 
  • Calendering
  • Compounding
  • Compression Molding
  • Extrusion
  • Injection Molding
  • Resin Transfer Molding
Physical
Nominal Value
Unit
 
Mooney Viscosity 2 (ML 1+10, 250°F)
MU
  
Fluorine Content 2
%
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Tecnoflon® PL 855, Tecnoflon PL 855, Tecnoflon® , Tecnoflon, TecnoflonPL855, PL 855, PL855, Fluoroelastomer, Fluorelastomer, Fluoropolymer, Solvay Specialty, 855PL
Features
Features may also be described by the following terms: Good Flow, Medium Viscosity, Good Mold Release, Easy Release, Good Demolding, Fast Cure, Fast Curing, Good Processability, Easy Processing, Low Temperature Flexibility.
Uses
Uses may also be described by the following terms: Gaskets, Gasketing, Belts/Belt Repair, Belt Repair.
Notes
1Typical properties: these are not to be construed as specifications.
2Raw polymer
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.