IDES Prospector Already have an account? Login Here

IDES

Tecnoflon® T 636

Fluoroelastomer

Supplied by Solvay Specialty Polymers

The technical datasheet with complete property values for Tecnoflon® T 636 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TECNOFLON® T 636 is a medium-low viscosity fluoroelastomer terpolymer designed to provide improved low temperature characteristics. Tecnoflon® T 636 does not contain curatives: therefore the proper levels of Tecnoflon® FOR M1 and Tecnoflon® FOR M2 must be added to achieve the required properties. Tecnoflon® T 636 exhibits the same excellent heat and chemical resistance expected from Tecnoflon® copolymers.

Some of the basic properties of TECNOFLON® T 636 are:
  • Improved low temperature performance
  • Good heat and chemical resistance
  • Very low compression set
  • Excellent mould release
  • Lack of mould fouling
  • Superior mould flow

Tecnoflon® T 636 can be used for compression, injection and transfer molding of O-rings, diaphragms, gaskets, seals, moulded shapes or other items requiring improved low temperature performance. Tecnoflon® T 636 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Good Chemical Resistance
  • Good Flow
  • Good Mold Release
  • High Heat Resistance
  • Low Compression Set
  • Medium-low Viscosity
  • Terpolymer
Uses 
  • Belts/Belt Repair
  • Blending
  • Diaphrams
  • Gaskets
  • Hose
  • Low Temperature Applications
  • Profiles
  • Seals
  • Sheet
Appearance 
  • Translucent
Forms 
  • Slab
Processing Method 
  • Calendering
  • Compounding
  • Compression Molding
  • Extrusion
  • Injection Molding
  • Resin Transfer Molding
Physical
Nominal Value
Unit
 
Mooney Viscosity 2 (ML 1+10, 250°F)
MU
  
Fluorine Content 2
%
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Tecnoflon® T 636, Tecnoflon T 636, Tecnoflon® , Tecnoflon, TecnoflonT636, T 636, T636, Fluoroelastomer, Fluorelastomer, Fluoropolymer, Solvay Specialty, 636T
Features
Features may also be described by the following terms: Good Flow, Medium-Low Viscosity, Medium Viscosity, Low Viscosity, Medium Low Viscosity, Good Mold Release, Easy Release, Good Demolding, Low Compression Set, Good Chemical Resistance, Chemical Resistant, High Heat Resistance.
Uses
Uses may also be described by the following terms: Gaskets, Gasketing, Belts/Belt Repair, Belt Repair.
Notes
1Typical properties: these are not to be construed as specifications.
2Raw polymer
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.