IDES Prospector Already have an account? Login Here

IDES

Georgia Gulf PVC 13820

Flexible Polyvinyl Chloride

Supplied by Georgia Gulf

The technical datasheet with complete property values for Georgia Gulf PVC 13820 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Non-lead stabilized, sunlight resistant insulation compound recommended for TW and 75C Class 43 applications. Good low temperature performance. Also suitable for outdoor jacket applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good UV Resistance
  • Sunlight Resistant (720 hours)
  
Uses 
  • Cable Jacketing
Wire Types 
  • TW
Agency Ratings 
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
100% Strain
psi
  
--
psi
  
Tensile Elongation (Break)
%
 ASTM D638
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Aging
Nominal Value
Unit
Test Method
Retention of Tensile Elongation - Air Aging, 10 days (212°F, 30.0 mil)
%
 UL 1581
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity (73°F)
ohm·cm
 ASTM D257
Flammability
Nominal Value
Unit
Test Method
Oxygen Index
%
 ASTM D2863
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Georgia Gulf PVC 13820, Georgia Gulf PVC , GeorgiaGulfPVC13820, GeorgiaGulfPVC, PVC 13820, PVC13820, PVC, 13820, Polyvinyl Chloride, Flexible, Polyvinyl Chloride Flexible, PVC, Flexible, PVC Flexible, Polyvinyl Chloride, Georgia Gulf, PolyvinylChlorideFlexible, PVCFlexible, PolyvinylChloride, 13820PVC
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Sunlight Resistant 720 hr, 720 hr Sun Resistant.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): UL (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.