IDES Prospector Already have an account? Login Here

IDES

HIPREN® EM 1500 T

Emulsion Styrene Butadiene Rubber

Supplied by HIP-PetroHemija

The technical datasheet with complete property values for HIPREN® EM 1500 T is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HIPREN® EM 1500 T is produced by cold copolymerisation process, with the use of rosin acids soaps as emulsifiers, and contains 23.5% styrene bounded in polymer. The rubber is stabilised with staining antioxidant added during the production process.

HIPREN® EM 1500T is dark coloured, without nitrosoamine.

HIPREN® EM 1500 T is compatible with natural rubber and other synthetic rubbers. Good compatibility, easy incorporation of various compounding ingredients provide possibility of mixing formulations for different applications requirement.

Application:
HIPREN EM 1500 T is used for production of wide range products including simple small articles, moulded and pressed products, light pneumatics and heavy conveyer belts, hoses, tires etc.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  
Additive 
  • Antioxidant
Features 
  • Antioxidant
Uses 
  • Belts/Belt Repair
  • Blending
  • Compounding
  • Hose
  • Pneumatic Applications
  • Tire Repair
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Compounding
Physical
Nominal Value
Unit
Test Method
Mooney Viscosity (ML 1+4, 212°F)
MU
 ISO 289
Bound Styrene
%
 ISO 2453
Ash Content
wt%
 ISO 247
Organic Acid
wt%
 ISO 7781
Soap
wt%
 ISO 7781
Stabilizer
wt%
  
Volatile Matter
wt%
 ISO 248
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress 2 (300% Strain, 293°F)
psi
 ISO 37
Tensile Stress 2 (Break, 293°F)
psi
 ISO 37
Tensile Elongation 2 (Break, 293°F)
%
 ISO 37
Bayshore Resilience 2
%
 ISO 4662
Hardness
Nominal Value
Unit
Test Method
Shore Hardness 2 (Shore A)
 
 ISO 868
Additional Information
Nominal Value
Unit
Test Method
Cure Time
     ISO 6502
50%
min
  
90%
min
  
Scorch Time
min
 ISO 6502
Torque
     ISO 6502
Max
dNm
  
Min
dNm
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HIPREN® EM 1500 T, HIPREN EM 1500 T, HIPREN® , HIPREN, HIPRENEM1500T, EM 1500 T, EM1500, 1500T, EM1500T, Styrene Butadiene Rubber, Emulsion, Styrene Butadiene Rubber Emulsion, SBR, Emulsion, SBR Emulsion, Polybutadiene Rubber, PBR, HIP-PetroHemija, StyreneButadieneRubberEmulsion, SBREmulsion, PolybutadieneRubber, 1500EM
Uses
Uses may also be described by the following terms: Compounding, Compounds, Belts/Belt Repair, Belt Repair.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Vulcanization temperature 145°C; Vulcanization time 35 min; Test specimen SI
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.