IDES Prospector Already have an account? Login Here

IDES

Scolefin 34 F 10-0

Polypropylene

Mineral Filler

Supplied by Ravago Group

The technical datasheet with complete property values for Scolefin 34 F 10-0 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PPH, mineral filled, V0 (1,6mm)
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Mineral Filler
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1
Tensile Stress (Yield)
psi
ISO 527-2/50
Tensile Strain (Break)
%
ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/A50
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL 2 (0.0630 in)
 
Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Scolefin 34 F 10-0, Scolefin 34 F 100, Scolefin , Scolefin34F100, 34 F 10, 34F10, 34 F 10-0, 34 F 100, 34 F 10:0, 34 F 10/0, 34 F 10+0, 34 F 10_0, 34 F 10 0, 34F, F10, 100, 34F100, 34F10_0, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Ravago, PolypropyleneUnspecified, PPUnspecified, F34
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Notes
1Typical properties: these are not to be construed as specifications.
2UL94 internally tested
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.