Already have an account? Login Here

IDES

AT 191A

Low Density Polyethylene

Supplied by Celanese EVA Performance Polymers

The technical datasheet with complete property values for AT 191A is available to members of the Prospector Plastics Database.
Register to view full datasheet.

Product Description

This resin is suitable for use in hot melt adhesive and coating applications.

General

Material Status

Commercial: Active

Availability

North America

Uses

Adhesives

Coating Applications

Agency Ratings

Forms

Pellets

Processing Method

Extrusion Coating

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR)			ASTM D1238
125°C/0.325 kg		g/10 min
190°C/2.16 kg		g/10 min
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength² (Break)		psi	ASTM D638
Tensile Elongation² (Break)		%	ASTM D638
Flexural Modulus - 1% Secant		psi	ASTM D790
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)			ASTM D2240
Thermal	Nominal Value	Unit	Test Method
Melting Temperature		°F	DSC
Ring and Ball Softening Point		°F	ASTM E28
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AT 191A, AT , AT191A, 191 A, 191A, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Celanese EVA, PolyethyleneLowDensity, A191
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).

Notes

¹Typical properties: these are not to be construed as specifications.

²Type IV, 2.0 in/min