IDES Prospector Already have an account? Login Here

IDES

KRATON® D1101 CS

Styrene Butadiene Styrene Block Copolymer

Supplied by Kraton Polymers LLC

The technical datasheet with complete property values for KRATON® D1101 CS is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Kraton® D-1101 polymer is a clear linear block copolymer based on styrene and butadiene, with bound styrene of 31% mass. It is supplied from Europe in five physical forms, identified as follows in the grade nomenclature:

  • D-1101CS/ES supplied as porous pellets dusted with an amorphous silica
  • D-1101CU supplied as undusted porous pellets
  • D-1101CM/EM supplied as powder dusted with an amorphous silica
  • D-1101CMU supplied as undusted powder
  • D-1101AF supplied as 'fluffy' crumb dusted with an amorphous silica

The first suffix letter in the grade nomenclature refers to the production facility of the specific grade.

Kraton D-1101 polymer is used as a modifier of bitumen in roofing felt coating compounds, roads and pipe coating; for use in formulating adhesives, sealants and coatings and it may also be suitable in the modification of polymers.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
  • South America
  
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Copolymer
  
Uses 
  • Adhesives
  • Coating Applications
  • Compounding
  • Pipe Coatings
  • Sealants
Forms 
  • Pellets
Processing Method 
  • Coating
  • Compounding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 2781
Apparent Density
g/cm³
 ASTM D1895B
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ISO 1133
Bound Styrene
%
 Internal Method
Ash Content
%
 ISO 247
Total Extractables
%
 Internal Method
Viscosity 2 (77°F)
Pa·s
 Internal Method
Volatile Matter
%
 Internal Method
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress 3 (300% Strain)
psi
 ISO 37
Tensile Stress 3 (Yield)
psi
 ISO 37
Tensile Elongation 3 (Break)
%
 ISO 37
Hardness
Nominal Value
Unit
Test Method
Shore Hardness 4 (Shore A)
 
 ISO 868
Additional Information
Nominal Value
Unit
Test Method
Antioxidant Additive 5
%
 Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: KRATON® D1101 CS, KRATON D1101 CS, KRATON® , KRATON, KRATOND1101CS, D 1101 CS, D1101 CS, D1101, 1101CS, D1101CS, Styrene Butadiene Styrene Block Copolymer, SBS, Thermoplastic Elastomer, TPE, StyreneButadieneStyreneBlockCopolymer, ThermoplasticElastomer, 1101D
Uses
Uses may also be described by the following terms: Compounding, Compounds, Sanitary Products, Pipe Coatings, Pipe Coating.
Notes
1Typical properties: these are not to be construed as specifications.
2Measured on 25% mass solution in toluene at 25°C using a Brookfield viscometer, LTF or LTV model
3Measured on films cast from a solution in toluene
430 sec
5Non-staining phenolic antioxidant
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.