HIPREN EM 1712 T HIP-PetroHemija Styrene Butadiene Rubber, Emulsion

Product Description

HIPREN® EM 1712 T is produced by cold copolymerisation process, with the use of rosin and fatty acids soaps as emulsifiers, and contains 23.5% styrene bounded in polymer. The rubber is stabilised with staining antioxidant added during the production process.

HIPREN® EM 1712 T is dark coloured, without nitrosoamine and contains 27.3% highly aromatic oil.

HIPREN® EM 1712 T is compatible with natural rubber and other synthetic rubbers. Good compatibility, easy incorporation of various compounding ingredients provide possibility of mixing formulations for different applications requirement.

HIPREN® EM 1712 T is used for production of pneumatics, conveyer belts and various dark coloured injection moulded and pressed articles. In many cases it can completely or partially replace natural rubber as well as other non oil extended synthetic rubbers.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

Additive

Antioxidant

Features

Antioxidant

Uses

Belts/Belt Repair

Pneumatic Applications

Agency Ratings

Forms

Bale

Processing Method

Injection Molding

Press Molding

Physical	Nominal Value	Unit	Test Method
Mooney Viscosity (ML 1+4, 212°F)		MU	ISO 289
Bound Styrene		%	ISO 2453
Ash Content		wt%	ISO 247
Organic Acid		wt%	ISO 7781
Soap		wt%	ISO 7781
Stabilizer		wt%
Volatile Matter		wt%	ISO 248
Elastomers	Nominal Value	Unit	Test Method
Tensile Stress² (300% Strain, 293°F)		psi	ISO 37
Tensile Stress² (Break, 293°F)		psi	ISO 37
Tensile Elongation² (Break, 293°F)		%	ISO 37
Bayshore Resilience²		%	ISO 4662
Hardness	Nominal Value	Unit	Test Method
Shore Hardness² (Shore A)			ISO 868
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ASTM D1525
Additional Information	Nominal Value	Unit	Test Method
Cure Time³			ISO 6502
50%		min
90%		min
ETA Extract		wt%	ASTM D5774
Scorch Time³		min	ISO 6502
Torque³			ISO 6502
Max		dNm
Min		dNm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HIPREN® EM 1712 T, HIPREN EM 1712 T, HIPREN® , HIPREN, HIPRENEM1712T, EM 1712 T, EM1712, 1712T, EM1712T, Styrene Butadiene Rubber, Emulsion, Styrene Butadiene Rubber Emulsion, SBR, Emulsion, SBR Emulsion, Polybutadiene Rubber, PBR, HIP-PetroHemija, StyreneButadieneRubberEmulsion, SBREmulsion, PolybutadieneRubber, 1712EM
Uses
Uses may also be described by the following terms: Belts/Belt Repair, Belt Repair.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).

Notes

¹Typical properties: these are not to be construed as specifications.

²Vulcanization temperature 145°C; Vulcanization time 35 min; Test specimen SI

³Standard test recipe : ISO 2322; Mixing procedure : ISO 2393 ; Carbon black : IRB 7Curemeter test: Reometar MDR 2000 ; Conditions: Temperature 160° C, Arc 0.5°

HIPREN® EM 1712 T

Emulsion Styrene Butadiene Rubber

Supplied by HIP-PetroHemija