IDES Prospector Already have an account? Login Here

IDES

HIPLEX® HMN 6050

High Density Polyethylene

Supplied by HIP-PetroHemija

The technical datasheet with complete property values for HIPLEX® HMN 6050 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HIPLEX® HMN 6050, copolymer of ethylene and hexene, is injection moulding grade with very good impact strength, good rigidity and hardness. The injection moulding parts fabricated from this grade have outstanding surface appearance.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  
Features 
  • Copolymer
  • Good Impact Resistance
  • Hexene Comonomer
  • High Hardness
  • High Rigidity
  • Pleasing Surface Appearance
Uses 
  • Crates
  • General Purpose
  • Household Goods
  • Support Trays
  • Toys
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Environmental Stress-Cracking Resistance
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2
Yield
psi
  
Break
psi
  
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ISO 180
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HIPLEX® HMN 6050, HIPLEX HMN 6050, HIPLEX® , HIPLEX, HIPLEXHMN6050, HMN 6050, HMN6050, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, HIP-PetroHemija, PolyethyleneHighDensity, 6050HMN
Features
Features may also be described by the following terms: Hexene Comonomer, High Rigidity, Pleasing Surface Appearance, High Hardness, Hard, Good Impact Resistance.
Uses
Uses may also be described by the following terms: Household Goods, Housewares, Support Trays.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.