IDES Prospector Already have an account? Login Here

IDES

HIPLEX® HXM 50100

High Density Polyethylene

Supplied by HIP-PetroHemija

The technical datasheet with complete property values for HIPLEX® HXM 50100 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HIPLEX® HXM 50100, copolymer of ethylene and hexene, extra high molecular weight and medium molecular weight distribution, is material with the best balance of stress cracking resistance, rigidity and melt strength. HIPLEX® HXM 50100 has very good processability.

APPLICATION:
HIPLEX® HXM 50100 is recommended for medium and large blow moulding products. It is suitable for the manufacture of containers for transport and storage of different chemicals. It is especially suitable for packaging of food.

HIPLEX®HXM 50100 has Health Certificate issued by Institute for Health Protection of Serbia.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  
Features 
  • Copolymer
  • Food Contact Acceptable
  • Good Melt Strength
  • Good Processability
  • Hexene Comonomer
  • High ESCR (Stress Crack Resist.)
  • High Rigidity
  • Med.-Wide Molecular Weight Distrib.
  • Recyclable Material
  • Ultra High Molecular Weight
Uses 
  • Blow Molding Applications
  • Food Packaging
  • Industrial Containers
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/D
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)
g/10 min
 ISO 1133
Environmental Stress-Cracking Resistance (F50)
hr
 ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2
Yield
psi
  
Break
psi
  
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
 
 ISO 180
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/B
Additional Information
Nominal Value
Unit
Test Method
Blow Molding Temperature
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HIPLEX® HXM 50100, HIPLEX HXM 50100, HIPLEX® , HIPLEX, HIPLEXHXM50100, HXM 50100, HXM50100, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, HIP-PetroHemija, PolyethyleneHighDensity, 50100HXM
Features
Features may also be described by the following terms: Hexene Comonomer, Medium Molecular Weight Distribution, Wide Molecular Weight Distribution, Medium MW Distribution, Wide MW Distribution, Ultra High Molecular Weight, Ultra High MW, Good Processability, Easy Processing, High Rigidity, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Melt Strength.
Uses
Uses may also be described by the following terms: Industrial Containers, Industrial Containers, Food Packaging.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.