IDES Prospector Already have an account? Login Here

IDES

HIPLEX® TR 144

High Density Polyethylene

Supplied by HIP-PetroHemija

The technical datasheet with complete property values for HIPLEX® TR 144 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HIPLEX® TR 144, copolymer of ethylene and hexene is tailored for blown film production. Extraordinary melt toughness made possible to get film down to 0.006 mm thickness. Extruded film has high impact resistance, good tear strength, excellent antiblock and good barrier properties, low gel content and excellent sealing and printing properties.

Application:
HIPLEX® TR-144 is suitable for production of composite films, carrier bags and other kinds of packaging. It is also recommended for blow moulding of small and medium size containers.

HIPLEX® TR-144 has Health Certificate issued by Institute for Health Protection of Serbia. Also, HIPLEX® TR-144 has Statement of Conformity, which declares product's conformity with the European norms for materials intended to come into contact with foodstuffs. Statement of Conformity is issued by Institute for Public Health, Maribor, Slovenia.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  
Additive 
  • Antiblock
Features 
  • Antiblocking
  • Barrier Resin
  • Copolymer
  • Excellent Printability
  • Food Contact Acceptable
  • Good Heat Seal
  • Good Melt Strength
  • Good Tear Strength
  • Hexene Comonomer
  • High Impact Resistance
  • Low Gel
Uses 
  • Bags
  • Blow Molding Applications
  • Blown Containers
  • Film
  • Packaging
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Blown Film
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Environmental Stress-Cracking Resistance (F50)
hr
 ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2
Yield
psi
  
Break
psi
  
Tensile Strain (Break)
%
 ISO 527-2
Films
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-3
MD: Yield
psi
  
TD: Yield
psi
  
MD: Break
psi
  
TD: Break
psi
  
Tensile Elongation
     ISO 527-3
MD: Break
%
  
TD: Break
%
  
Dart Drop Impact
g
 ASTM D1709
Elmendorf Tear Strength
     ASTM D1922
MD
g
  
TD
g
  
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
 
 ISO 180
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A
Additional Information
Nominal Value
Unit
Test Method
Blow Molding Temperature 2
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HIPLEX® TR 144, HIPLEX TR 144, HIPLEX® , HIPLEX, HIPLEXTR144, TR 144, TR144, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, HIP-PetroHemija, PolyethyleneHighDensity, 144TR
Features
Features may also be described by the following terms: Hexene Comonomer, Antiblocking, Unspecified Antiblock, Low Gel, Good Heat Seal, Good Melt Strength, Good Tear Strength, High Impact Resistance, Excellent Printability, Printable.
Uses
Uses may also be described by the following terms: Blow Containers, Blown Container.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Blow-up ratio: 3.5-5 : 1, Neck height: 6-10 times die diameter
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.