IDES Prospector Already have an account? Login Here

IDES

Ateva® 1210

Ethylene Vinyl Acetate Copolymer

Supplied by Celanese EVA Performance Polymers

The technical datasheet with complete property values for Ateva® 1210 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
This resin is suitable for coextrusion and blending applications where superior strength, good heat seal and hot track characteristics are required.
This copolymer is recommended for tubing applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Copolymer
  • Food Contact Acceptable
  • Good Heat Seal
  • High Strength
  • Hot Tack Strength
Uses 
  • Blending
  • Packaging
  • Tubing
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Coextrusion
  • Extrusion
 
Physical
Nominal Value
Unit
Test Method
Density 2
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Vinyl Acetate Content
wt%
Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 3 (Break, 0.00197 in)
psi
ASTM D638
Tensile Elongation 3 (Break, 0.00197 in)
%
ASTM D638
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
 
Tensile Strength 4
    ASTM D882A
MD: Yield, 2.0 mil
psi
 
TD: Yield, 2.0 mil
psi
 
MD: Break, 2.0 mil
psi
 
TD: Break, 2.0 mil
psi
 
Tensile Elongation 4
    ASTM D882A
MD: Break, 2.0 mil
%
 
TD: Break, 2.0 mil
%
 
Dart Drop Impact 5 (0.98 mil)
g
ASTM D1709
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
ASTM D746
Vicat Softening Temperature
°F
ASTM D1525
Peak Melting Temperature
°F
ASTM D3418
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.97 mil)
 
ASTM D2457
Haze (1.97 mil)
%
ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ateva® 1210, Ateva 1210, Ateva® , Ateva, Ateva1210, 1210, Ethylene Vinyl Acetate Copolymer, EVA, Polyethylene, PE, Celanese EVA, EthyleneVinylAcetateCopolymer
Features
Features may also be described by the following terms: High Strength, Good Heat Seal, Hot Tack Strength.
Uses
Uses may also be described by the following terms: Tubing, Tube.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Injection
Nominal Value
 
 
Screw L/D Ratio
 
 
Notes
1Typical properties: these are not to be construed as specifications.
2ASTM D1928 Proc A
3Type IV, 2.0 in/min
420 in/min
5F50
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.