IDES Prospector Already have an account? Login Here

IDES

Soarnol® V2504R

Ethylene Vinyl Alcohol

Supplied by Soarus L.L.C.

The technical datasheet with complete property values for Soarnol® V2504R is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Soarnol V2504R is a 25 mol% ethylene content grade of Soarnol with a low melt flow rate. Soarnol V2504R is truly a unique EVOH with the best gas barrier property at low humidity of all commercial EVOH resins. It is suited for coextruded blow-molded containers as well as coextruded sheet, coextruded film, and coextrusion coating.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Copolymer
  • Food Contact Acceptable
  • Gas Barrier
  • Low Flow
  
Uses 
  • Blown Containers
  • Coating Applications
  • Film
  • Sheet
  
Agency Ratings 
 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Coating
  • Coextruded Film
  • Coextrusion
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (210°C/2.16 kg)
g/10 min
  
Ethylene Content
wt%
 Internal Method
Volatile Matter
%
  
Films
Nominal Value
Unit
Test Method
Oxygen Permeability 2 (68°F, 0.79 mil)
cm³/100 in²/24 hr
 Internal Method
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
 DSC
Peak Crystallization Temperature (DSC)
°F
 DSC
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Soarnol® V2504R, Soarnol V2504R, Soarnol® , Soarnol, SoarnolV2504R, V 2504 R, V2504R, V2504, 2504R, Ethylene Vinyl Alcohol, EVOH, Vinyl Alcohol, VOH, Soarus, EthyleneVinylAlcohol, VinylAlcohol, 2504V
Features
Features may also be described by the following terms: Low Flow, Low Melt, Low MFI, Gas Barrier.
Uses
Uses may also be described by the following terms: Blow Containers, Blown Container.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EU (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Extrusion Notes
Extruder: 40 mm Single screw extruder, L/D = 28
Screw: Full-flighted, constant pitch type, CR = 3.5
Screen pack: 80/120/50 mesh
Die: Manifold type, die width = 450 mm, lip clearance = 0.2 mm
Notes
1Typical properties: these are not to be construed as specifications.
2Measured with OXTRAN 10/50 (MOCON), 65%RH
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.