IDES Prospector Already have an account? Login Here

IDES

Delrin® 100PE NC010

ACETAL RESIN

Supplied by DuPont Performance Polymers

The technical datasheet with complete property values for Delrin® 100PE NC010 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Delrin® 100PE is a high viscosity acetal homopolymer, an enhanced version of Delrin® 100P with extremely low VOC emissions. It has improved processing thermal stability, good mechanical properties, and toughness.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Fatigue Resistant
  • Good Creep Resistance
  • Good Dimensional Stability
  • Good Toughness
  • High Impact Resistance
  • High Molecular Weight
  • High Stiffness
  • High Strength
  • High Viscosity
  • Homopolymer
  • Low VOC
Uses 
  • Automotive Interior Parts
  • Engineering Parts
  • Fasteners
  • Gears
  
RoHS Compliance 
Appearance 
  • Natural Color
Processing Method 
  • Extrusion
  • Injection Molding
  
Part Marking Code (ISO 11469)
  • >POM<
Resin ID (ISO 1043)
  • POM
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
     ISO 294-4
Across Flow: 0.0787 in
%
  
Flow: 0.0787 in
%
  
Water Absorption
     ISO 62
73°F, 24 hr
%
  
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2
Tensile Strain (Yield, 73°F)
%
 ISO 527-2
Nominal Tensile Strain at Break (73°F)
%
 ISO 527-2
Tensile Creep Modulus
     ISO 899-1
1 hr
psi
  
1000 hr
psi
  
Flexural Modulus (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength (73°F)
 
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Melting Temperature 2
°F
 ISO 11357-3
CLTE
     ISO 11359-2
Flow: -40 to 73°F
in/in/°F
  
Flow: 73 to 131°F
in/in/°F
  
Flow: 131 to 212°F
in/in/°F
  
Transverse: -40 to 73°F
in/in/°F
  
Transverse: 73 to 131°F
in/in/°F
  
Transverse: 131 to 212°F
in/in/°F
  
Related Terminology
This supplier and product may also be known by these terms: Derlin

Product names can be difficult to match. You may have searched any one of these terms to find this product: Delrin® 100PE NC010, Delrin 100PE NC010, Delrin® , Delrin, Delrin100PENC010, 100 PE NC 010, 100PE NC010, 100PE, PENC, NC010, 100PENC010, Acetal Homopolymer, Acetal Homopolymer, Acetal (POM) Homopolymer, Acetal POM Homopolymer, Acetal, pom, DuPont, AcetalPOMHomopolymer, PE100
Features
Features may also be described by the following terms: High Viscosity, Low VOC, Good Toughness, Tough, High Strength, High Stiffness, High Impact Resistance, High Molecular Weight, High MW, Good Dimensional Stability, Dimensionally Stable, Good Creep Resistance, Creep Resistant.
Uses
Uses may also be described by the following terms: Engineering Parts.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Melt Temperature, Optimum - Injection Molding
°F
  
Mold Temperature
°F
  
Mold Temperature, Optimum - Injection Molding
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
210°C/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.