IDES Prospector Already have an account? Login Here

IDES

Zytel® HTN 51G50HSL BK083

HIGH PERFORMANCE POLYAMIDE RESIN

Glass Fiber Reinforcement, 50%

Supplied by DuPont Performance Polymers

The technical datasheet with complete property values for Zytel® HTN 51G50HSL BK083 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Zytel® HTN51G50HSL BK083 is a 50% glass reinforced, heat stabilized, lubricated high performance polyamide resin. It is also a PPA resin.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 50% Filler by Weight
RoHS Compliance 
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
Part Marking Code (ISO 11469)
  • >PA6T/XT-GF50<
Part Marking Code (SAE J1344)
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
 ISO 1183
Molding Shrinkage
       ISO 294-4
Across Flow: 0.0787 in
--
%
  
Flow: 0.0787 in
--
%
  
Water Absorption (73°F, 24 hr)
--
%
 ISO 62
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Break, 73°F)
psi
 ISO 527-2
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Flexural Modulus (73°F)
--
psi
 ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength
       ISO 179/1eA
-40°F
--
ft·lb/in²
  
73°F
--
ft·lb/in²
  
Charpy Unnotched Impact Strength (73°F)
--
ft·lb/in²
 ISO 179/1eU
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
--
°F
 ISO 75-2/A
Melting Temperature 2
--
°F
 ISO 11357-3
CLTE
       ISO 11359-2
Flow: -40 to 73°F
--
in/in/°F
  
Flow: 73 to 131°F
--
in/in/°F
  
Flow: 131 to 230°F
--
in/in/°F
  
Flow: 320 to 392°F
--
in/in/°F
  
Transverse: -40 to 73°F
--
in/in/°F
  
Transverse: 73 to 131°F
--
in/in/°F
  
Transverse: 131 to 230°F
--
in/in/°F
  
Transverse: 320 to 392°F
--
in/in/°F
  
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: Zytel® HTN 51G50HSL BK083, Zytel HTN 51G50HSL BK083, Zytel® HTN , Zytel HTN, ZytelHTN51G50HSLBK083, ZytelHTN, HTN 51 G 50 HSL BK 083, HTN51G50HSL BK083, HTN51, HTN, 51 G 50 HSL BK 083, HTN51G50HSLBK083, 51G50HSL BK083, 51G, G50, 50HSL, HSLBK, BK083, 51G50HSLBK083, Polyphthalamide, PPA, Polyamide, Nylon, DuPont, G51, 51HTN
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: Zytel® HTN 51G50HSL BK083, Zytel HTN 51G50HSL BK083, Zytel® HTN , Zytel HTN, ZytelHTN51G50HSLBK083, ZytelHTN, HTN 51 G 50 HSL BK 083, HTN51G50HSL BK083, HTN51, HTN, 51 G 50 HSL BK 083, HTN51G50HSLBK083, 51G50HSL BK083, 51G, G50, 50HSL, HSLBK, BK083, 51G50HSLBK083, Polyphthalamide, PPA, Polyamide, Nylon, DuPont, G51, 51HTN
Injection
Dry
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Melt Temperature, Optimum
°F
  
Mold Temperature
°F
  
Mold Temperature, Optimum
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
210°C/min, First Heat
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.