Ateva® 1820 Celanese EVA Ethylene Vinyl Acetate Copolymer

Product Description

This resin is suitable for use in hot melt coating and adhesive applications.

General

Material Status

Availability

Features

Uses

Agency Ratings

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Vinyl Acetate Content		wt%
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength² (Break)		psi	ASTM D638
Tensile Elongation² (Break)		%	ASTM D638
Flexural Modulus - 1% Secant		psi	ASTM D790
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)			ASTM D2240
Thermal	Nominal Value	Unit	Test Method
Melting Temperature		°F	DSC
Additional Information
Ring & Ball Softening Point, ASTM E28: 172°C The value listed as Density ASTM D1505, was also tested in accordance with ASTM D1928 Proc A.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ateva® 1820, Ateva 1820, Ateva® , Ateva, Ateva1820, 1820, Ethylene Vinyl Acetate Copolymer, EVA, Polyethylene, PE, Celanese EVA, EthyleneVinylAcetateCopolymer
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Sanitary Products.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (2).

Extrusion	Nominal Value	Unit
Melt Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²Type IV, 2.0 in/min

Ateva® 1820