Kern LCP GF30 HT Kern Liquid Crystal Polymer (Glass Fiber Reinforcement, 30%)

General
Material Status	Commercial: Active
Availability	Europe
Filler / Reinforcement	Glass Fiber Reinforcement, 30% Filler by Weight
Appearance	Opaque
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Water Absorption			ISO 62
Saturation, 73°F		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Break)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness (H 358/30)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Max. Continuous Use Temperature		°F
Brittleness Temperature		°F
Glass Transition Temperature		°F	ISO 11357-2
CLTE			ISO 11359-2
Flow		in/in/°F
Transverse		in/in/°F
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Dielectric Constant			IEC 60250
50 Hz
1 MHz
Dissipation Factor			IEC 60250
50 Hz
1 MHz
Comparative Tracking Index		V	IEC 60112
Electric Strength (0.0394 in)		V/mil	IEC 60243-1
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.00787 in)			UL 94
Additional Information	Nominal Value	Unit	Test Method
Material Number
Raw Material
Short Time Use Temperature		°F
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Kern LCP GF30 HT, Kern , KernLCPGF30HT, LCP GF 30 HT, LCP GF30 HT, LCPGF, GF30, 30HT, LCPGF30HT, Liquid Crystal Polymer, LCP, LiquidCrystalPolymer, GFLCP

Notes

¹Typical properties: these are not to be construed as specifications.

Kern LCP GF30 HT