IDES Prospector Already have an account? Login Here

IDES

Kern PA 6 GF30

Polyamide 6

Supplied by Kern GmbH

The technical datasheet with complete property values for Kern PA 6 GF30 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Uses 
  • Foam
  • Housings
  • Machine/Mechanical Parts
  • Profiles
 
Appearance 
  • Opaque
Processing Method 
  • Extrusion
  • Injection Molding
 
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
ISO 1183
Water Absorption
      ISO 62
Saturation, 73°F
--
%
 
Equilibrium, 73°F, 50% RH
--
%
 
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Break)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Notched Izod Impact Strength (73°F)
ft·lb/in²
ISO 180/2A
Hardness
Dry
Conditioned
Unit
Test Method
Shore Hardness (Shore D)
 
ISO 868
Ball Indentation Hardness (H 961/30)
psi
ISO 2039-1
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature
       
66 psi, Unannealed
--
°F
ISO 75-2/B
264 psi, Unannealed
--
°F
ISO 75-2/A
Max. Continuous Use Temperature
--
°F
 
Brittleness Temperature
--
°F
 
Glass Transition Temperature
--
°F
ISO 11357-2
CLTE
      ISO 11359-2
Flow
in/in/°F
 
Transverse
in/in/°F
 
Thermal Conductivity
--
Btu·in/hr/ft²/°F
DIN 52612
Electrical
Dry
Conditioned
Unit
Test Method
Surface Resistivity
ohms
IEC 60093
Volume Resistivity
ohm·cm
IEC 60093
Dielectric Constant
      IEC 60250
50 Hz
 
 
1 MHz
 
 
Dissipation Factor
      IEC 60250
50 Hz
 
 
1 MHz
 
 
Comparative Tracking Index
--
V
IEC 60112
Electric Strength (0.0630 in)
--
V/mil
IEC 60243-1
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating - UL (0.0591 in)
--
 
IEC 60695-11-10
Additional Information
Dry
Conditioned
Unit
Test Method
Material Number
 
 
Short Time Use Temperature
--
°F
 
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: Kern PA 6 GF30, Kern , KernPA6GF30, PA 6 GF 30, PA 6 GF30, PA6, 6GF, GF30, PA6GF30, Polyamide 6, Nylon 6, Polyamide, Nylon, Polyamide6, Nylon6, 6PA
Generic Name
Dry
Generic Name may also be described by the following terms: PA6.
Conditioned
Generic Name may also be described by the following terms: PA6.
Uses
Dry
Uses may also be described by the following terms: Machine Parts, Mechanical Parts, Machine/Mechanical Parts, Housings, Housing.
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: Kern PA 6 GF30, Kern , KernPA6GF30, PA 6 GF 30, PA 6 GF30, PA6, 6GF, GF30, PA6GF30, Polyamide 6, Nylon 6, Polyamide, Nylon, Polyamide6, Nylon6, 6PA
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.