IDES Prospector Already have an account? Login Here

IDES

Kern PA 12 GF30

Polyamide 12

Glass Fiber Reinforcement, 30%

Supplied by Kern GmbH

The technical datasheet with complete property values for Kern PA 12 GF30 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Uses 
  • Foam
  • Housings
  • Machine/Mechanical Parts
  • Profiles
  
Appearance 
  • Opaque
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Max. Continuous Use Temperature
°F
  
Brittleness Temperature
°F
  
Glass Transition Temperature
°F
 ISO 11357-2
CLTE
     ISO 11359-2
Flow
in/in/°F
  
Transverse
in/in/°F
  
Thermal Conductivity
Btu·in/hr/ft²/°F
 DIN 52612
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Dielectric Constant
     IEC 60250
50 Hz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250
50 Hz
 
  
1 MHz
 
  
Comparative Tracking Index
V
 IEC 60112
Electric Strength (0.0394 in)
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0295 in)
 
 IEC 60695-11-10
Additional Information
Nominal Value
Unit
Test Method
Material Number
 
  
Raw Material
 
  
Short Time Use Temperature
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Kern PA 12 GF30, Kern , KernPA12GF30, PA 12 GF 30, PA 12 GF30, PA12, 12GF, GF30, PA12GF30, Polyamide 12, Nylon 12, Polyamide, Nylon, Polyamide12, Nylon12, 12PA
Generic Name
Generic Name may also be described by the following terms: PA12.
Uses
Uses may also be described by the following terms: Machine Parts, Mechanical Parts, Machine/Mechanical Parts, Housings, Housing.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.