IDES Prospector Already have an account? Login Here

IDES

MEGOLON™ HF8142 UV

Thermoplastic

Supplied by AlphaGary

The technical datasheet with complete property values for MEGOLON™ HF8142 UV is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
A FLEXIBLE, THERMOPLASTIC, ZERO HALOGEN, 105°C RATED, FLAME RETARDED, OLEFINIC, UV RESISTANT COMPOUND INTENDED FOR DEMANDING TELECOMMUNICATION CABLES.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Additive 
  • UV Stabilizer
Features 
  • Flame Retardant
  • Good UV Resistance
  • Halogen Free
Uses 
  • Communication Cable Jacketing
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/10.0 kg)
g/10 min
 ASTM D1238
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 0.0300 in)
psi
 ASTM D412
Tensile Elongation (Break, 0.0300 in)
%
 ASTM D412
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240
Shore D
 
  
Shore D, 15 sec
 
  
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Hot Pressure Test 2 (176°F)
%
 IEC 811-3-1
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air 3 (212°F, 168 hr)
%
 ASTM D573
Change in Ultimate Elongation in Air 3 (212°F, 168 hr)
%
 ASTM D573
Change in Tensile Strength 3 (158°F, 4 hr, in ASTM #2 Oil)
%
 ASTM D471
Change in Ultimate Elongation 3 (158°F, 4 hr, in ASTM #2 Oil)
%
 ASTM D471
Electrical
Nominal Value
Unit
Test Method
Dielectric Constant
     ASTM D150
73°F, 1 MHz
 
  
73°F, 100 MHz
 
  
73°F, 200 MHz
 
  
73°F, 350 MHz
 
  
73°F, 600 MHz
 
  
73°F, 1.00 GHz
 
  
Dissipation Factor
     ASTM D150
73°F, 1 MHz
 
  
73°F, 100 MHz
 
  
73°F, 200 MHz
 
  
73°F, 350 MHz
 
  
73°F, 600 MHz
 
  
73°F, 1.00 GHz
 
  
Flammability
Nominal Value
Unit
Test Method
Oxygen Index (0.125 in)
%
 ASTM D2863
Acid Gas Emission Conductivity
µS/cm
 IEC 60754-2
Acid Gas Emission pH
 
 IEC 60754-2
Halogen Content
      
--
ppm
 IEC 754-1
--
%
 MIL C-24643
Smoke
 
 NES 711
Temperature Index (Burning)
°F
 NES 715
Toxicity
 
 NES 713
Related Terminology
This supplier and product may also be known by these terms: Alpha Gary

Product names can be difficult to match. You may have searched any one of these terms to find this product: MEGOLON™ HF8142 UV, MEGOLON HF8142 UV, MEGOLON™ , MEGOLON, MEGOLONHF8142UV, HF 8142 UV, HF8142 UV, HF8142, 8142UV, HF8142UV, Thermoplastic, Unspecified, Thermoplastic Unspecified, TP, Unspecified, TP Unspecified, AlphaGary, ThermoplasticUnspecified, TPUnspecified, 8142HF
Features
Features may also be described by the following terms: Zero Halogen Content, Halogen Free, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Uses
Uses may also be described by the following terms: Communication Cable Jacketing.
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Screw Design: Low Compression Ratio 1.5 to 2.5:1
Barrier Screw
Screen Pack: 20/20 or 20/40
Notes
1Typical properties: these are not to be construed as specifications.
2loss
3UL Standard, thickness: 30 mil
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.