IDES Prospector Already have an account? Login Here

IDES

MEGOLON™ IN700

Thermoplastic

Supplied by AlphaGary

The technical datasheet with complete property values for MEGOLON™ IN700 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
MEGOLON IN700 is a thermoplastic, halogen free, fire retardant cable compound which demonstrates excellent insulation properties.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Electrically Insulating
  • Flame Retardant
  • Halogen Free
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (150°C/21.6 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Elongation at Break
     IEC 60811-1-2
after 10 days
%
  
after 7 days: 176°F
%
  
Tensile Strength
     IEC 60811-1-2
after 10 days: 212°F
psi
  
after 7 days: 176°F
psi
  
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 IEC 60811-1-1
Tensile Elongation (Break)
%
 IEC 60811-1-1
Tear Strength
lbf/in
 BS 6469 99.1
Thermal
Nominal Value
Unit
Test Method
Hot Pressure Test (194°F)
%
 IEC 60754-1
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air
     IEC 60811-1-2
176°F, 168 hr
%
  
212°F, 240 hr
%
  
Change in Tensile Strain at Break in Air
     IEC 60811-1-2
176°F, 168 hr
%
  
212°F, 240 hr
%
  
Electrical
Nominal Value
Unit
Test Method
Dielectric Constant (10 MHz)
 
 ASTM D150
Dissipation Factor (10 MHz)
 
 ASTM D150
Insulation Resistance
     BS 6469 99.2
68°F 2
ohm·cm
  
158°F 3
ohm·cm
  
176°F 3
ohm·cm
  
194°F 3
ohm·cm
  
Initial Value: 68°F
ohm·cm
  
Flammability
Nominal Value
Unit
Test Method
Oxygen Index
%
 ISO 4589-2
Acid Gas Emission Conductivity
µS/cm
 IEC 60754-2
Acid Gas Emission pH
 
 IEC 60754-2
Smoke Density
     ASTM E662
-- 4
min
  
-- 5
min
  
Flaming Mode
Ds
  
Non-flaming Mode
Ds
  
Toxicity
 
 NES 713
Additional Information
Nominal Value
Unit
Test Method
Halogen Acid Gas Evolution
%
 IEC 60754-1
Immersion in salt solution for 10 days at 60°C under continuous 220V electrical stress, UNE 21031-2 Clause 2.5: Pass
Related Terminology
This supplier and product may also be known by these terms: Alpha Gary

Product names can be difficult to match. You may have searched any one of these terms to find this product: MEGOLON™ IN700, MEGOLON IN700, MEGOLON™ , MEGOLON, MEGOLONIN700, IN 700, IN700, Thermoplastic, Unspecified, Thermoplastic Unspecified, TP, Unspecified, TP Unspecified, AlphaGary, ThermoplasticUnspecified, TPUnspecified, 700IN
Features
Features may also be described by the following terms: Zero Halogen Content, Halogen Free.
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Compression ratio: 1-2 : 1
Draw down ratio: 1.5:1
Notes
1Typical properties: these are not to be construed as specifications.
2After 12 hours immersion in water
3After 2 hours immersion in water
4Time to Maximum, Flaming Mode
5Time to Maximum, Non-flaming Mode
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.