IDES Prospector Already have an account? Login Here

IDES

Garathane™ GTX 96-320-B NAT

Polyvinyl Chloride Alloy

Supplied by AlphaGary

The technical datasheet with complete property values for Garathane™ GTX 96-320-B NAT is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
GARATHANE X 96-320-B IS A PVC ALLOY FOOTWEAR COMPOUND
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Uses 
  • Footwear
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Mechanical
Nominal Value
Unit
Test Method
Taber Abrasion Resistance
     Internal Method
-- 2
%
  
-- 3
%
  
Ross Flex (-20°F, 0.25 in)
 
 ASTM D1052
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress 4 (100% Strain)
psi
 ASTM D412
Tensile Strength (Yield, 0.0750 in)
psi
 ASTM D412
Tensile Elongation 4 (Break)
%
 ASTM D412
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240
Shore A
 
  
Shore A, 15 sec
 
  
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Aging
Nominal Value
Unit
Test Method
Change in Volume 4
      
73°F, 168 hr, in Gasoline
%
  
73°F, 336 hr, in Gasoline
%
  
73°F, 336 hr, in Vegetable Oil
%
  
167°F, 168 hr, in Vegetable Oil
%
  
Related Terminology
This supplier and product may also be known by these terms: Alpha Gary

Product names can be difficult to match. You may have searched any one of these terms to find this product: Garathane™ GTX 96-320-B NAT, Garathane GTX 96320B NAT, Garathane™ , Garathane, GarathaneGTX96320BNAT, GTX 96, GTX 96-320-B NAT, GTX 96320B NAT, GTX 96:320:B NAT, GTX 96/320/B NAT, GTX 96+320+B NAT, GTX 96_320_B NAT, GTX 96 320 B NAT, GTX96, 96320, 320B, BNAT, GTX96320BNAT, GTX96_320_BNAT, Polyvinyl Chloride Alloy, PVC Alloy, Polyvinyl Chloride, PVC, AlphaGary, PolyvinylChlorideAlloy, PVCAlloy, PolyvinylChloride, 96GTX
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Injection Notes
Zone 4: 320°F
Zone 5: 320°F
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2loss, Taber Abrasion QLWI-8.2.4-44, 5000 cycles,
3loss, Taber Abrasion QLWI-8.2.4-44, 1000 cycles,
4thickness: 75 mil
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.