IDES Prospector Already have an account? Login Here

IDES

Alpha PVC GW 2052 SPEC NAT LCF

Polyvinyl Chloride

Supplied by AlphaGary

The technical datasheet with complete property values for Alpha PVC GW 2052 SPEC NAT LCF is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
A 60°C RATED, LEAD FREE BUFFERING COMPOUND INTENDED FOR OFNP AND OFNR CABLE CONSTRUCTIONS.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Flame Retardant
  • Low (to None) Lead Content
  
Uses 
  • Cable Jacketing
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D412
Yield, 0.0300 in
psi
  
Yield, 0.0750 in
psi
  
Tensile Elongation
     ASTM D412
Break 2
%
  
Break 3
%
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240
Shore D
 
  
Shore D, 15 sec
 
  
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air
     ASTM D573
212°F, 168 hr 4
%
  
212°F, 168 hr 5
%
  
Change in Ultimate Elongation in Air
     ASTM D573
212°F, 168 hr 4
%
  
212°F, 168 hr 5
%
  
Electrical
Nominal Value
Unit
Test Method
Dielectric Constant (73°F, 100 MHz)
 
 ASTM D150
Dissipation Factor (73°F, 100 MHz)
 
 ASTM D150
Flammability
Nominal Value
Unit
Test Method
Oxygen Index (0.125 in)
%
 ASTM D2863
Related Terminology
This supplier and product may also be known by these terms: Alpha Gary

Product names can be difficult to match. You may have searched any one of these terms to find this product: Alpha PVC GW 2052 SPEC NAT LCF, Alpha PVC , AlphaPVCGW2052SPECNATLCF, AlphaPVC, PVCGW 2052 SPEC NAT LCF, PVCGW2052, PVC, PVCGW2052SPECNATLCF, GW 2052 SPEC NAT LCF, GW2052, 2052SPEC, SPECNAT, NATLCF, GW2052SPECNATLCF, Polyvinyl Chloride, Unspecified, Polyvinyl Chloride Unspecified, PVC, Unspecified, PVC Unspecified, Polyvinyl Chloride, AlphaGary, PolyvinylChlorideUnspecified, PVCUnspecified, PolyvinylChloride, 2052GW, 2052PVCGW
Features
Features may also be described by the following terms: Low Lead Content.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Screw Design: PVC metering, cored with water cooling.
Screw water exit temperature of 100 degrees F.
Note: To optimize physical properties, it is recommended to use hot water at 150 degrees F in the cooling trough; 3 to 1 draw down ratio.
Notes
1Typical properties: these are not to be construed as specifications.
2thickness: 75 mil
3thickness: 30 mil
4UL Standard, thickness: 10 mil
5UL Standard, thickness: 30 mil
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.