IDES Prospector Already have an account? Login Here

IDES

Alpha PVC GW 2403-1-VW1 NATURAL 105-LCF

Polyvinyl Chloride

Supplied by AlphaGary

The technical datasheet with complete property values for Alpha PVC GW 2403-1-VW1 NATURAL 105-LCF is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
A HIGH QUALITY, LEAD FREE, LOW TEMPERATURE, FLAME RETARDED, OIL & SUNLIGHT RESISTANT, 105C DEGREE JACKETING COMPOUND FOR TRAY CABLE APPLICATIONS.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Flame Retardant
  • Good UV Resistance
  • Low (to None) Lead Content
  • Oil Resistant
  
Uses 
  • Cable Jacketing
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D412
Yield, 0.0300 in
psi
  
Yield, 0.0750 in
psi
  
Tensile Elongation
     ASTM D412
Break 2
%
  
Break 3
%
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240
Shore A
 
  
Shore A, 15 sec
 
  
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air 4 (277°F, 168 hr)
%
 ASTM D573
Change in Ultimate Elongation in Air 4 (277°F, 168 hr)
%
 ASTM D573
Change in Tensile Strength 5 (158°F, 4 hr, in ASTM #2 Oil)
%
 ASTM D471
Change in Ultimate Elongation 4 (158°F, 4 hr, in ASTM #2 Oil)
%
 ASTM D471
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity (158°F)
ohm·cm
 ASTM D257
Dielectric Constant (73°F, 100 MHz)
 
 ASTM D150
Dissipation Factor (73°F, 100 MHz)
 
 ASTM D150
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0320 in)
 
 UL 94
Oxygen Index (0.125 in)
%
 ASTM D2863
Related Terminology
This supplier and product may also be known by these terms: Alpha Gary

Product names can be difficult to match. You may have searched any one of these terms to find this product: Alpha PVC GW 2403-1-VW1 NATURAL 105-LCF, Alpha PVC GW 24031VW1 NATURAL 105LCF, Alpha PVC , AlphaPVCGW24031VW1NATURAL105LCF, AlphaPVC, PVCGW 2403 1 VW 1 NATURAL 105 LCF, GW 2403, PVCGW 2403-1-VW1 NATURAL 105-LCF, PVCGW 24031VW1 NATURAL 105LCF, PVCGW 2403:1:VW1 NATURAL 105:LCF, PVCGW 2403/1/VW1 NATURAL 105/LCF, PVCGW 2403+1+VW1 NATURAL 105+LCF, PVCGW 2403_1_VW1 NATURAL 105_LCF, PVCGW 2403 1 VW1 NATURAL 105 LCF, PVCGW2403, PVCGW 2403, GW 2403 1 VW 1 NATURAL 105 LCF, PVCGW24031VW1NATURAL105LCF, GW 2403-1-VW1 NATURAL 105-LCF, GW 24031VW1 NATURAL 105LCF, GW 2403:1:VW1 NATURAL 105:LCF, GW 2403/1/VW1 NATURAL 105/LCF, GW 2403+1+VW1 NATURAL 105+LCF, GW 2403_1_VW1 NATURAL 105_LCF, GW 2403 1 VW1 NATURAL 105 LCF, GW2403, 24031, 1VW, VW1, 1NATURAL, NATURAL105, 105LCF, PVCGW2403_1_VW1NATURAL105_LCF, GW24031VW1NATURAL105LCF, GW2403_1_VW1NATURAL105_LCF, Polyvinyl Chloride, Unspecified, Polyvinyl Chloride Unspecified, PVC, Unspecified, PVC Unspecified, Polyvinyl Chloride, PVC, AlphaGary, PolyvinylChlorideUnspecified, PVCUnspecified, PolyvinylChloride, 2403GW, 2403PVCGW
Features
Features may also be described by the following terms: Low Lead Content, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2thickness: 75 mil
3thickness: 30 mil
4UL Standard, thickness: 30 mil
5UL Standard, thickness: 40 mil
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.