IDES Prospector Already have an account? Login Here

IDES

Alpha PVC GW 2409-VW1 NAT 50 LCF

Semi-Rigid Polyvinyl Chloride

Supplied by AlphaGary

The technical datasheet with complete property values for Alpha PVC GW 2409-VW1 NAT 50 LCF is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
A 105°C RATED, LEAD FREE, HIGH GRADE, SEMI-RIGID FOR UL STYLE 1061 CSA-SR-PVC AND MIL-W-16878.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Flame Retardant
  • Low (to None) Lead Content
  
Agency Ratings 
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D412
Yield, 0.0100 in
psi
  
Yield, 0.0750 in
psi
  
Tensile Elongation
     ASTM D412
Break 2
%
  
Break 3
%
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240
Shore D
 
  
Shore D, 15 sec
 
  
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air 4 (277°F, 168 hr)
%
 ASTM D573
Change in Ultimate Elongation in Air 4 (277°F, 168 hr)
%
 ASTM D573
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Constant (73°F, 100 MHz)
 
 ASTM D150
Dissipation Factor (73°F, 100 MHz)
 
 ASTM D150
Flammability
Nominal Value
Unit
Test Method
Oxygen Index (0.125 in)
%
 ASTM D2863
Related Terminology
This supplier and product may also be known by these terms: Alpha Gary

Product names can be difficult to match. You may have searched any one of these terms to find this product: Alpha PVC GW 2409-VW1 NAT 50 LCF, Alpha PVC GW 2409VW1 NAT 50 LCF, Alpha PVC , AlphaPVCGW2409VW1NAT50LCF, AlphaPVC, PVCGW 2409 VW 1 NAT 50 LCF, GW 2409, PVCGW 2409-VW1 NAT 50 LCF, PVCGW 2409VW1 NAT 50 LCF, PVCGW 2409:VW1 NAT 50 LCF, PVCGW 2409/VW1 NAT 50 LCF, PVCGW 2409+VW1 NAT 50 LCF, PVCGW 2409_VW1 NAT 50 LCF, PVCGW 2409 VW1 NAT 50 LCF, PVCGW2409, PVCGW 2409, GW 2409 VW 1 NAT 50 LCF, PVCGW2409VW1NAT50LCF, GW 2409-VW1 NAT 50 LCF, GW 2409VW1 NAT 50 LCF, GW 2409:VW1 NAT 50 LCF, GW 2409/VW1 NAT 50 LCF, GW 2409+VW1 NAT 50 LCF, GW 2409_VW1 NAT 50 LCF, GW 2409 VW1 NAT 50 LCF, GW2409, 2409VW, VW1, 1NAT, NAT50, 50LCF, PVCGW2409_VW1NAT50LCF, GW2409VW1NAT50LCF, GW2409_VW1NAT50LCF, Polyvinyl Chloride, Semi-Rigid, Polyvinyl Chloride SemiRigid, Polyvinyl Chloride, Semi:Rigid, Polyvinyl Chloride, Semi/Rigid, Polyvinyl Chloride, Semi+Rigid, Polyvinyl Chloride, Semi_Rigid, Polyvinyl Chloride, Semi Rigid, PVC, Semi-Rigid, PVC SemiRigid, PVC, Semi:Rigid, PVC, Semi/Rigid, PVC, Semi+Rigid, PVC, Semi_Rigid, PVC, Semi Rigid, Polyvinyl Chloride, PVC, AlphaGary, PolyvinylChlorideSemiRigid, Polyvinyl Chloride Semi_Rigid, Polyvinyl Chloride Semi Rigid, PVCSemiRigid, PVC Semi_Rigid, PVC Semi Rigid, PolyvinylChloride, PolyvinylChlorideSemi_Rigid, PVCSemi_Rigid, 2409GW, 2409PVCGW
Features
Features may also be described by the following terms: Low Lead Content.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): CSA (1), MIL (1), UL (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Screw Design: Standard metering screw with screw cooling. Cooling water exit temperature at 100 degrees F.
Maddock mixing screw
To maximize physical properties use hot water at 150 degrees F in cooling trough
Notes
1Typical properties: these are not to be construed as specifications.
2thickness: 75 mil
3thickness: 10 mil
4UL Standard, thickness: 10 mil
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.