IDES Prospector Already have an account? Login Here

IDES

Garaflex™ O GFO 9939NA NATURAL

Thermoplastic Elastomer

Supplied by AlphaGary

The technical datasheet with complete property values for Garaflex™ O GFO 9939NA NATURAL is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
GARAFLEX O 9939NA IS A PBB, PBBE, AND PBBO FREE, 105°C RATED, FLAME RETARDED, OLEFINIC THERMOPLASTIC ELASTOMER INTENDED FOR FLAT RIBBON CABLE PRIMARY AND HEAT TRACING CABLE.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Flame Retardant
Uses 
  • Cable Jacketing
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 0.0300 in)
psi
 ASTM D412
Tensile Elongation 2 (Break)
%
 ASTM D412
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240
Shore A
 
  
Shore A, 15 sec
 
  
Shore D
 
  
Shore D, 15 sec
 
  
Electrical
Nominal Value
Unit
Test Method
Dielectric Constant
     ASTM D150
73°F, 1 MHz
 
  
73°F, 100 MHz
 
  
73°F, 1.00 GHz
 
  
Dissipation Factor
     ASTM D150
73°F, 1 MHz
 
  
73°F, 100 MHz
 
  
73°F, 1.00 GHz
 
  
Flammability
Nominal Value
Unit
Test Method
Oxygen Index (0.125 in)
%
 ASTM D2863
Related Terminology
This supplier and product may also be known by these terms: Alpha Gary

Product names can be difficult to match. You may have searched any one of these terms to find this product: Garaflex™ O GFO 9939NA NATURAL, Garaflex O GFO 9939NA NATURAL, Garaflex™ O , Garaflex O, GaraflexOGFO9939NANATURAL, GaraflexO, OGFO 9939 NA NATURAL, OGFO 9939NA NATURAL, OGFO9939, GFO 9939 NA NATURAL, OGFO9939NANATURAL, GFO 9939NA NATURAL, GFO9939, 9939NA, NANATURAL, GFO9939NANATURAL, Thermoplastic Elastomer, TPE, AlphaGary, ThermoplasticElastomer, 9939GFO, 9939OGFO
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Screw Design: Standard olefin metering screw
Notes
1Typical properties: these are not to be construed as specifications.
2thickness: 30 mil
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.