IDES Prospector Already have an account? Login Here

IDES

Garaflex™ O GFO 9940SA NAT

Thermoplastic Elastomer

Supplied by AlphaGary

The technical datasheet with complete property values for Garaflex™ O GFO 9940SA NAT is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
GARAFLEX-O 9940SA IS A PBB, PBBE and PBBO FREE, 105°C RATED, RoHS COMPLIANT, FLAME RETARDED OLEFINIC THERMOPLASTIC ELASTOMER INTENDED FOR FLAT RIBBON CABLE PRIMARY AND HEAT TRACING CABLE
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Flame Retardant
Uses 
  • Cable Jacketing
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 0.0300 in)
psi
 ASTM D412
Tensile Elongation 2 (Break)
%
 ASTM D412
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240
Shore D
 
  
Shore D, 15 sec
 
  
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air 3 (277°F, 168 hr)
%
 ASTM D573
Change in Ultimate Elongation in Air 3 (277°F, 168 hr)
%
 ASTM D573
Electrical
Nominal Value
Unit
Test Method
Dielectric Constant (73°F, 1 MHz)
 
 ASTM D150
Dissipation Factor (73°F, 1 MHz)
 
 ASTM D150
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0320 in)
 
 UL 94
Oxygen Index (0.125 in)
%
 ASTM D2863
Related Terminology
This supplier and product may also be known by these terms: Alpha Gary

Product names can be difficult to match. You may have searched any one of these terms to find this product: Garaflex™ O GFO 9940SA NAT, Garaflex O GFO 9940SA NAT, Garaflex™ O , Garaflex O, GaraflexOGFO9940SANAT, GaraflexO, OGFO 9940 SA NAT, OGFO 9940SA NAT, OGFO9940, GFO 9940 SA NAT, OGFO9940SANAT, GFO 9940SA NAT, GFO9940, 9940SA, SANAT, GFO9940SANAT, Thermoplastic Elastomer, TPE, AlphaGary, ThermoplasticElastomer, 9940GFO, 9940OGFO
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Screen Pack: 40/80 or 40/100
Notes
1Typical properties: these are not to be construed as specifications.
2thickness: 30 mil
3UL Standard, thickness: 30 mil
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.