IDES Prospector Already have an account? Login Here

IDES

Garaflex™ G GFG 7795-A7 NAT

Thermoplastic Elastomer

Supplied by AlphaGary

The technical datasheet with complete property values for Garaflex™ G GFG 7795-A7 NAT is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
GARAFLEX G 7795-A7 IS A FLAME RETARDANT THERMOPLASTIC ELASTOMER INTENDED FOR APPLIANCE AND AUTOMOTIVE WIRING (125C DEGREE).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Flame Retardant
Uses 
  • Appliance Wire Insulation
  • Wire Jacketing
  
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 0.0300 in)
psi
 ASTM D412
Tensile Elongation 2 (Break)
%
 ASTM D412
Tear Strength 3, 4
lbf/in
 ASTM D624
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240
Shore D
 
  
Shore D, 15 sec
 
  
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air 5
     ASTM D573
277°F, 168 hr
%
  
316°F, 168 hr
%
  
Change in Ultimate Elongation in Air 5
     ASTM D573
277°F, 168 hr
%
  
316°F, 168 hr
%
  
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity (73°F)
ohm·cm
 ASTM D257
Dielectric Strength (73°F)
V/mil
 ASTM D149
Dielectric Constant (1 MHz)
 
 ASTM D150
Dissipation Factor (73°F, 1 MHz)
 
 ASTM D150
Flammability
Nominal Value
Unit
Test Method
Oxygen Index (0.125 in)
%
 ASTM D2863
Related Terminology
This supplier and product may also be known by these terms: Alpha Gary

Product names can be difficult to match. You may have searched any one of these terms to find this product: Garaflex™ G GFG 7795-A7 NAT, Garaflex G GFG 7795A7 NAT, Garaflex™ G , Garaflex G, GaraflexGGFG7795A7NAT, GaraflexG, GGFG 7795 A 7 NAT, GFG 7795, GGFG 7795-A7 NAT, GGFG 7795A7 NAT, GGFG 7795:A7 NAT, GGFG 7795/A7 NAT, GGFG 7795+A7 NAT, GGFG 7795_A7 NAT, GGFG 7795 A7 NAT, GGFG7795, GGFG 7795, GFG 7795 A 7 NAT, GGFG7795A7NAT, GFG 7795-A7 NAT, GFG 7795A7 NAT, GFG 7795:A7 NAT, GFG 7795/A7 NAT, GFG 7795+A7 NAT, GFG 7795_A7 NAT, GFG 7795 A7 NAT, GFG7795, 7795A, A7, 7NAT, GGFG7795_A7NAT, GFG7795A7NAT, GFG7795_A7NAT, Thermoplastic Elastomer, TPE, AlphaGary, ThermoplasticElastomer, 7795GFG, 7795GGFG
Uses
Uses may also be described by the following terms: Appliance Wire Insulation.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2thickness: 30 mil
3Die C
4thickness: 75 mil
5UL Standard, thickness: 30 mil
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.