IDES Prospector Already have an account? Login Here

IDES

Acculam™ Epoxyglas G10 nonFR

Epoxy; Epoxide

Glass Fiber Reinforcement, 10%

Supplied by Accurate Plastics, Inc.

The technical datasheet with complete property values for Acculam™ Epoxyglas G10 nonFR is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Acculam® Epoxyglas G10 nonFR - Laminate sheet comprised of a halogen free epoxy resin binder and a woven fiberglass substrate. It qualifies to NEMA G10 and MIL-I-24768/2.

This material exhibits high mechanical strength and electrical insulating qualities under both dry and humid conditions. Its ease of fabrication allows its use in many structural and cryogenic applications where halogenated compounds may be undesirable.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 10% Filler by Weight
Features 
  • Electrically Insulating
  • Good Processability
  • Halogen Free
  • High Strength
  
Uses 
  • Laminates
  • Sheet
  
Forms 
  • Sheet
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Water Absorption (24 hr, 0.125 in)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Flexural Strength
     ASTM D790
0.125 in 2
psi
  
0.125 in 3
psi
  
Compressive Strength 4
psi
 ASTM D695
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-- 5
ft·lb/in
  
-- 6
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Temperature Index
°F
  
Electrical
Nominal Value
Unit
Test Method
Relative Permittivity 7
 
 IEC 60250
Dissipation Factor
     ASTM D150
-- 7
 
  
-- 8
 
  
Dielectric Breakdown
      
-- 9
V
  
A
V
  
Additional Information
Nominal Value
Unit
Test Method
Bond Strength
g
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Acculam™ Epoxyglas G10 nonFR, Acculam Epoxyglas G10 nonFR, Acculam™ , Acculam, AcculamEpoxyglasG10nonFR, Epoxyglas G 10 nonFR, Epoxyglas G10 nonFR, EpoxyglasG, G10, 10nonFR, EpoxyglasG10nonFR, Epoxy; Epoxide, Epoxy Epoxide, Epoxy, Accurate Plastics, EpoxyEpoxide, GEpoxyglas
Features
Features may also be described by the following terms: High Strength, Zero Halogen Content, Halogen Free, Good Processability, Easy Processing.
Notes
1Typical properties: these are not to be construed as specifications.
2CW-A
3LW-A
4Flatwise
5CW
6LW
7D24/23
8A
9D48/50
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.