IDES Prospector Already have an account? Login Here

IDES

Acculam™ Epoxyglas G11 nonFR

Epoxy; Epoxide

Glass Fiber Reinforcement, 11%

Supplied by Accurate Plastics, Inc.

The technical datasheet with complete property values for Acculam™ Epoxyglas G11 nonFR is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Acculam® Epoxyglas G11 nonFR -Laminate sheet comprised of heat resistant/halogen free epoxy resin and a woven fiberglass substrate. It qualifies to NEMA G11 and MIL-I-24768/3

This material exhibits extremely high mechanical strength at elevated temperatures and has good dielectric loss and electric strength properties under both dry and humid conditions. It is resistant to flow, dimensional change, chemicals and has low moisture absorption.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 11% Filler by Weight
Features 
  • Good Chemical Resistance
  • Good Dimensional Stability
  • Good Electrical Properties
  • Halogen Free
  • High Heat Resistance
  • High Strength
  • Low Moisture Absorption
Uses 
  • Laminates
  • Sheet
  
Forms 
  • Sheet
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Water Absorption (24 hr, 0.125 in)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Flexural Strength
     ASTM D790
-- 2
psi
  
-- 3
psi
  
Compressive Strength 4
psi
 ASTM D695
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-- 5
ft·lb/in
  
-- 6
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Temperature Index
°F
  
Electrical
Nominal Value
Unit
Test Method
Relative Permittivity 7
 
 IEC 60250
Dissipation Factor
     ASTM D150
-- 7
 
  
-- 8
 
  
Dielectric Breakdown
      
-- 9
V
  
A
V
  
Additional Information
Nominal Value
Unit
Test Method
Bond Strength
g
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Acculam™ Epoxyglas G11 nonFR, Acculam Epoxyglas G11 nonFR, Acculam™ , Acculam, AcculamEpoxyglasG11nonFR, Epoxyglas G 11 nonFR, Epoxyglas G11 nonFR, EpoxyglasG, G11, 11nonFR, EpoxyglasG11nonFR, Epoxy; Epoxide, Epoxy Epoxide, Epoxy, Accurate Plastics, EpoxyEpoxide, GEpoxyglas
Features
Features may also be described by the following terms: High Heat Resistance, High Strength, Good Electrical Properties, Zero Halogen Content, Halogen Free, Good Chemical Resistance, Chemical Resistant, Good Dimensional Stability, Dimensionally Stable, Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant.
Notes
1Typical properties: these are not to be construed as specifications.
2LW-A
3LW-E-1/150
4Flatwise
5CW
6LW
7D24/23
8A
9D48/50
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.