IDES Prospector Already have an account? Login Here

IDES

HIPLEX® HHM 5502

High Density Polyethylene

Supplied by HIP-PetroHemija

The technical datasheet with complete property values for HIPLEX® HHM 5502 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HIPLEX® HHM 5502, copolymer of ethylene and hexene, with medium molecular weight and medium molecular weight distribution, is blow moulding grade for production of small and medium size containers.

HIPLEX® HHM 5502 has good rigidity, hardness, impact strength, environmental stress cracking resistance, and excellent processability.

HIPLEX®HHM 5502 is suitable for production of small and medium size containers for packaging of bleach, chemicals and most of detergents. It is not recommended for heavy-duty detergents.

HIPLEX® HHM 5502 has Health Certificate issued by Institute for Health Protection of Serbia. Also, HIPLEX®HHM 5502 has Statement of Conformity, which declares product's conformity with the European norms for materials intended to come into contact with foodstuffs. Statement of Conformity is issued by Institute for Public Health, Maribor, Slovenia.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  
Features 
  • Copolymer
  • Good Impact Resistance
  • Good Processability
  • Hexene Comonomer
  • High ESCR (Stress Crack Resist.)
  • High Hardness
  • High Rigidity
  • Med.-Wide Molecular Weight Distrib.
  • Medium Molecular Weight
  • Recyclable Material
Uses 
  • Blow Molding Applications
  • Blown Containers
  
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/D
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Environmental Stress-Cracking Resistance (F50)
hr
 ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2
Yield
psi
  
Break
psi
  
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ISO 180
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306
Additional Information
Nominal Value
Unit
Test Method
Blow Molding Temperature
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HIPLEX® HHM 5502, HIPLEX HHM 5502, HIPLEX® , HIPLEX, HIPLEXHHM5502, HHM 5502, HHM5502, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, HIP-PetroHemija, PolyethyleneHighDensity, 5502HHM
Features
Features may also be described by the following terms: Hexene Comonomer, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, High Hardness, Hard, Good Impact Resistance, Medium Molecular Weight Distribution, Wide Molecular Weight Distribution, Medium MW Distribution, Wide MW Distribution, Medium Molecular Weight, Medium MW, Good Processability, Easy Processing, High Rigidity.
Uses
Uses may also be described by the following terms: Blow Containers, Blown Container.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.