IDES Prospector Already have an account? Login Here

IDES

Desmopan® 5377A

Thermoplastic Polyurethane Elastomer (Ester/Ether)

Supplied by Bayer MaterialScience AG

The technical datasheet with complete property values for Desmopan® 5377A is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Extrusion- and injection molding grade; improved microbial resistance; Improved hydrolysis resistance; Application; Cable sheathings; Textile coating; Wristwatch straps; hard to soft systems
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Density
lb/in³
 ISO 1183 2
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress 3
     DIN 53504
Break, 73°F
psi
  
50% Strain, 73°F
psi
  
100% Strain, 73°F
psi
  
Tensile Stress 4
     DIN 53504
10% Strain: 73°F
psi
  
300% Strain: 73°F
psi
  
Tensile Strain 3 (Break, 73°F)
%
 DIN 53504
Abrasion Resistance (73°F)
mm³
 ISO 4649
Tensile Storage Modulus
     ISO 6721-1,-4
-4°F
psi
  
68°F
psi
  
140°F
psi
  
Elastomers
Nominal Value
Unit
Test Method
Tear Strength 5
lbf/in
 ISO 34-1
Compression Set
     ISO 815
73°F, 72.0 hr
%
  
158°F, 24.0 hr
%
  
Impact
Nominal Value
Unit
Test Method
Impact Resilience
%
 ISO 4662
Hardness
Nominal Value
Unit
Test Method
Shore Hardness
     ISO 868 2
Shore A, 3 sec
 
  
Shore D, 15 sec
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Desmopan® 5377A, Desmopan 5377A, Desmopan® , Desmopan, Desmopan5377A, 5377 A, 5377A, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Ester/Ether), Thermoplastic Polyurethane Elastomer EsterEther, Thermoplastic Polyurethane Elastomer (Ester:Ether), Thermoplastic Polyurethane Elastomer (Ester+Ether), Thermoplastic Polyurethane Elastomer (Ester-Ether), Thermoplastic Polyurethane Elastomer (Ester_Ether), Thermoplastic Polyurethane Elastomer (Ester Ether), TPU-Ester/Ether, TPUEsterEther, TPU-Ester:Ether, TPU-Ester+Ether, TPU-Ester-Ether, TPU-Ester_Ether, TPU-Ester Ether, TPU:Ester/Ether, TPU/Ester/Ether, TPU+Ester/Ether, TPU_Ester/Ether, TPU Ester/Ether, Thermoplastic Polyurethane, TPU, Bayer Euro, ThermoplasticPolyurethaneElastomerEsterEther, Thermoplastic Polyurethane Elastomer Ester_Ether, Thermoplastic Polyurethane Elastomer Ester Ether, TPUEster_Ether, TPUEster Ether, TPU_EsterEther, TPU EsterEther, ThermoplasticPolyurethane, ThermoplasticPolyurethaneElastomerEster_Ether, A5377
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
37.9 in/min
4200 mm/min
520 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.