Kelon® B FR H2 CEG/500-V0CT3 Lati Polyamide 6 (Glass\Mineral)

Product Description

Heat stabilised. Mineral filler / Glass fibres. UL94 V-0 classified, halogens and red phosphorus free.
Product UL certified.
Low thermal expansion coefficient.

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

Latin America

North America

South America

Filler / Reinforcement

Glass\Mineral

Additive

Heat Stabilizer

Features

Halogen Free

Heat Stabilized

Low (to None) Phosphorus Content

Agency Ratings

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage²			ISO 294-4
Across Flow		%
Flow		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus			ISO 527-2
73°F		psi
140°F		psi
194°F		psi
248°F		psi
302°F		psi
Tensile Stress			ISO 527-2
Break, 73°F		psi
Break, 140°F		psi
Break, 194°F		psi
Break, 248°F		psi
Break, 302°F		psi
Tensile Strain			ISO 527-2
Break, 73°F		%
Break, 140°F		%
Break, 194°F		%
Break, 248°F		%
Break, 302°F		%
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-4°F		ft·lb/in²
73°F		ft·lb/in²
Charpy Unnotched Impact Strength			ISO 179/1eU
-4°F		ft·lb/in²
73°F		ft·lb/in²
Notched Izod Impact (73°F)		ft·lb/in	ASTM D256A
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B50
CLTE - Flow (86 to 212°F)		in/in/°F	ASTM D696
Thermal Conductivity		Btu·in/hr/ft²/°F	ASTM E1952-01
Continuous Use Temperature		°F
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0295 in
0.0591 in
0.118 in
Glow Wire Flammability Index			IEC 60695-2-12
0.0394 in		°F
0.0787 in		°F
Glow Wire Ignition Temperature (0.0394 in)		°F	IEC 60695-2-13
Oxygen Index		%	ASTM D2863
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Kelon® B FR H2 CEG/500-V0CT3, Kelon B FR H2 CEG500V0CT3, Kelon® B , Kelon B, KelonBFRH2CEG500V0CT3, KelonB, FR H 2 CEG, BFR H 2 CEG 500 V 0 CT 3, BFR H 2 CEG, FR H2 CEG, BFR H2 CEG/500-V0CT3, BFR H2 CEG500V0CT3, BFR H2 CEG:500-V0CT3, BFR H2 CEG+500-V0CT3, BFR H2 CEG-500-V0CT3, BFR H2 CEG_500-V0CT3, BFR H2 CEG 500-V0CT3, BFR H2 CEG/500:V0CT3, BFR H2 CEG/500/V0CT3, BFR H2 CEG/500+V0CT3, BFR H2 CEG/500_V0CT3, BFR H2 CEG/500 V0CT3, BFRH, BFR H2 CEG, FR H 2 CEG 500 V 0 CT 3, FRH2CEG, BFRH2CEG500V0CT3, BFR H2 CEG_500V0CT3, BFR H2 CEG 500V0CT3, BFR H2 CEG500_V0CT3, BFR H2 CEG500 V0CT3, BFRH2CEG, FR H2 CEG/500-V0CT3, FR H2 CEG500V0CT3, FR H2 CEG:500-V0CT3, FR H2 CEG+500-V0CT3, FR H2 CEG-500-V0CT3, FR H2 CEG_500-V0CT3, FR H2 CEG 500-V0CT3, FR H2 CEG/500:V0CT3, FR H2 CEG/500/V0CT3, FR H2 CEG/500+V0CT3, FR H2 CEG/500_V0CT3, FR H2 CEG/500 V0CT3, FRH, H2, 2CEG, CEG500, 500V, V0, 0CT, CT3, BFRH2CEG_500V0CT3, BFRH2CEG500_V0CT3, FRH2CEG500V0CT3, FR H2 CEG_500V0CT3, FR H2 CEG 500V0CT3, FR H2 CEG500_V0CT3, FR H2 CEG500 V0CT3, FRH2CEG_500V0CT3, FRH2CEG500_V0CT3, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Lati, Polyamide6, Nylon6, HFR, HBFR
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Zero Halogen Content, Halogen Free, Low Phosphorus Content.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): UL (1).

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Rate

Notes

¹Typical properties: these are not to be construed as specifications.

²60 MPa

Kelon® B FR H2 CEG/500-V0CT3

Polyamide 6

Glass\Mineral

Supplied by LATI S.p.A.