IDES Prospector Already have an account? Login Here

IDES

Latigray 82-03 CW/95

Polyamide 12

Metallic Filler, 95%

Supplied by LATI S.p.A.

The technical datasheet with complete property values for Latigray 82-03 CW/95 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Radiopaque compound based on Polyamide 12 (PA 12). Metallic filler.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Filler / Reinforcement 
  • Metallic Filler, 95% Filler by Weight
Features 
  • Radiopaque
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage 2
     ISO 294-4
Across Flow: 0.0787 in
%
  
Flow: 0.0787 in
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2/1
Tensile Stress (Break, 73°F)
psi
 ISO 527-2/5
Tensile Strain (Break, 73°F)
%
 ISO 527-2/5
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 3 (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength 3 (73°F)
ft·lb/in²
 ISO 179/1eU
Notched Izod Impact 4 (73°F)
ft·lb/in
 ASTM D256A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Volume Resistivity
ohm·cm
 ASTM D257
Electromagnetic Reflection
dB
 ASTM EST-83
Additional Information
Nominal Value
Unit
Test Method
Half Value Thickness
     Internal Method
-- 5
mil
  
-- 6
mil
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Latigray 82-03 CW/95, Latigray 8203 CW95, Latigray , Latigray8203CW95, 82, 82 03 CW 95, 82-03 CW/95, 8203 CW95, 82-03 CW:95, 82-03 CW+95, 82-03 CW-95, 82-03 CW_95, 82-03 CW 95, 82:03 CW/95, 82/03 CW/95, 82+03 CW/95, 82_03 CW/95, 82 03 CW/95, 8203, 03CW, CW95, 8203CW95, 8203 CW_95, 8203 CW 95, 82_03 CW95, 82 03 CW95, 8203CW_95, 82_03CW95, Polyamide 12, Nylon 12, Polyamide, Nylon, pa12, Lati, Polyamide12, Nylon12, 0382
Generic Name
Generic Name may also be described by the following terms: PA12.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
2at 60 Mpa of cavity pressure
380x10x4 mm
463.5x12.7x3.2 mm
5120 kV
680 kV
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.