IDES Prospector Already have an account? Login Here

IDES

Ultradur® B 4043 G6 HR BK15073

Polybutylene Terephthalate

Glass Fiber Reinforcement, 30%

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultradur® B 4043 G6 HR BK15073 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Ultradur B 4043 G6 HR BK15073 is a hydrolysis resistant, pigmented black, 30% fiberglass reinforced PBT exhibiting superior surface finish and low warpage.

Ultradur B 4043 G6 HR BK15073 was developed for thin walled automotive connectors and sensors designed to meet USCAR Class III and NaOH resistance requirements.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Good Surface Finish
  • Hydrolysis Resistant
  • Low Warpage
Uses 
  • Automotive Applications
  • Connectors
  • Thin-walled Parts
Agency Ratings 
 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Break, 73°F)
psi
ISO 527-2
Tensile Strain (Break, 73°F)
%
ISO 527-2
Flexural Modulus (73°F)
psi
ISO 178
Flexural Strength (73°F)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179
Thermal
Nominal Value
Unit
Test Method
Melting Temperature (DSC)
°F
ISO 3146
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultradur® B 4043 G6 HR BK15073, Ultradur B 4043 G6 HR BK15073, Ultradur® , Ultradur, UltradurB4043G6HRBK15073, B 4043 G 6 HR BK 15073, B 4043 G6 HR BK15073, B4043, 4043G, G6, 6HR, HRBK, BK15073, B4043G6HRBK15073, Polybutylene Terephthalate, PBT, Polyester, BASF, PolybutyleneTerephthalate, 4043B
Features
Features may also be described by the following terms: Good Surface Finish, Low Warpage, Low Warp.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): USCAR (1), EC (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Pressure
psi
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.