IDES Prospector Already have an account? Login Here

IDES

Asrene® SP 4808

High Density Polyethylene

Supplied by Chandra Asri Petrochemical

The technical datasheet with complete property values for Asrene® SP 4808 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • High ESCR (Stress Crack Resist.)
  • High Tensile Strength
  
Uses 
  • Piping
Agency Ratings 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Environmental Stress-Cracking Resistance (10% Igepal, F50)
hr
 ASTM D1693
Viscosity 2 (374°F)
mPa·s
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Slow Crack Growth Resistance - Notch Test 3 (176°F)
month
  
Impact
Nominal Value
Unit
Test Method
Tensile Impact Strength
ft·lb/in²
 ASTM D1822
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Oxidation Induction Time (392°F)
hr
 ASTM D3895
Additional Information
Nominal Value
Unit
Test Method
Hydrostatic Resistance 4
     ISO 1167
12.4 MPa: 68°F
day
  
5.0 MPa: 176°F
day
  
5.5 MPa: 176°F
day
  
Longitudinal Reversion 5
%
 ISO 2505-1, -2
Rapid Crack Propagation - S4 Test 5 (32°F)
psi
 ISO 13477
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Asrene® SP 4808, Asrene SP 4808, Asrene® , Asrene, AsreneSP4808, SP 4808, SP4808, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Chandra Asri, PolyethyleneHighDensity, 4808SP
Features
Features may also be described by the following terms: High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, High Tensile Strength.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): PPI (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
20.1 sec^-1, Torque Rheometer
39.2 bar, PE-100, S-5, SDR-11, PN-16, OD-110mm
4PE-100, S-5, SDR-11, PN-16, OD-32mm
5PE-100, S-5, SDR-11, PN-16, OD-110mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.