IDES Prospector Already have an account? Login Here

IDES

SABIC® PPcompound 7990E

Polypropylene

Mineral Filler

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® PPcompound 7990E is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® PPcompound 7990E is a mineral filled modified polypropylene.This material combines a very high flow with a high stiffness, it has ben optimized for minimized VOC and FOG. Typical applications include non esthetical automotive interior parts and multi material injection molding (textile overmolding) such as door panels and interior trim.

SABIC® PPcompound 7990E is a designated automotive grade.
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Europe
Filler / Reinforcement 
  • Mineral Filler
Additive 
  • Impact Modifier
Features 
  • High Flow
  • High Stiffness
  • Impact Modified
Uses 
  • Automotive Applications
  • Automotive Interior Parts
  • Automotive Interior Trim
Automotive Specifications 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage (24 hr)
%
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2/50
Yield, 0.126 in, Injection Molded
psi
  
Break, 0.126 in, Injection Molded
psi
  
Tensile Strain (Break, 0.126 in, Injection Molded)
%
 ISO 527-2/50
Flexural Modulus 2 (Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (-40°F, Injection Molded)
ft·lb/in²
 ISO 179/1eU
Notched Izod Impact Strength
     ISO 180/4A
-4°F
ft·lb/in²
  
32°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Injection Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A
CLTE - Flow
     ASTM D696
-22 to 86°F
in/in/°F
  
73 to 176°F
in/in/°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® PPcompound 7990E, SABIC PPcompound 7990E, SABIC® PPcompound , SABIC PPcompound, SABICPPcompound7990E, SABICPPcompound, PPcompound 7990 E, PPcompound7990E, PPcompound7990, PPcompound, 7990 E, 7990E, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, SABIC, PolypropyleneUnspecified, PPUnspecified, E7990, 7990PPcompound
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI, High Stiffness.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): IMDS (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Method I (3 point load)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.